Difference between revisions of "Template:TC-Helicon to L1®"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m
m
Line 10: Line 10:
 
</pre>
 
</pre>
 
</noinclude>
 
</noinclude>
 +
 
{{T1 icon}}{{Model 1S icon}}{{Model II icon}}
 
{{T1 icon}}{{Model 1S icon}}{{Model II icon}}
  
I don't use {{{Model parameter 1|Compact Channel 1}}} when I'm using the {{{TCH}}}.   
+
The {{{TCH}}} has two outputs available (Vocal and Guitar) but I choose the LEFT output and run MONO so that I can make the connection with one cable. I don't use {{{Model parameter 1|Compact Channel 1}}} when I'm using the {{{TCH}}}.   
  
 
I prefer to use an adapter (XLR to &frac14; inch jack) from the {{{TCH}}}  left out - to {{{Model parameter 1|Compact Channel 1}}}.  That way you don't have to work around the {{{L1}}}'s internal microphone Preset. There's MIX button the {{{TCH}}} that brings up a screen where its EASY to control the relative volumes (voice and guitar) on the GTX so I don't have to touch the Compact once I'm set up. And it's nice to use just one cable from the {{{TCH}}} to the {{{L1}}}.  This also keeps the {{{Model parameter 1|Compact Channel 1}}} free in case I need to plug in another microphone.
 
I prefer to use an adapter (XLR to &frac14; inch jack) from the {{{TCH}}}  left out - to {{{Model parameter 1|Compact Channel 1}}}.  That way you don't have to work around the {{{L1}}}'s internal microphone Preset. There's MIX button the {{{TCH}}} that brings up a screen where its EASY to control the relative volumes (voice and guitar) on the GTX so I don't have to touch the Compact once I'm set up. And it's nice to use just one cable from the {{{TCH}}} to the {{{L1}}}.  This also keeps the {{{Model parameter 1|Compact Channel 1}}} free in case I need to plug in another microphone.

Revision as of 03:23, 10 February 2014

Usage:

{{TC-Helicon to L1®
|L1=[[Compact]]
|Model parameter 1= [[Compact#Channel_1|Compact Channel 1]]
|Model parameter 2= [[Compact#Channel_2|Compact Channel 2]]
|TCH=[http://www.tc-helicon.com/products/voicelive-play-gtx/ VoiceLive Play GTX]
}}


T1 This information is applicable to the T1 ToneMatch® audio engine
L1 Model 1S This information is applicable to the L1®  Model 1S
L1 Model II This information is applicable to the L1®  Model II

The {{{TCH}}} has two outputs available (Vocal and Guitar) but I choose the LEFT output and run MONO so that I can make the connection with one cable. I don't use Compact Channel 1 when I'm using the {{{TCH}}}.

I prefer to use an adapter (XLR to ¼ inch jack) from the {{{TCH}}} left out - to Compact Channel 1. That way you don't have to work around the {{{L1}}}'s internal microphone Preset. There's MIX button the {{{TCH}}} that brings up a screen where its EASY to control the relative volumes (voice and guitar) on the GTX so I don't have to touch the Compact once I'm set up. And it's nice to use just one cable from the {{{TCH}}} to the {{{L1}}}. This also keeps the Compact Channel 1 free in case I need to plug in another microphone.


I use an adapter like this

xlr female to 1/4 female adapter

XLRTo14female.png

]


using a ¼ inch jack Tip-Ring-Sleeve cable

TO

{{{Model parameter 2}}}

Compact Channel 2 Line Level.png