Difference between revisions of "Template:Summing Devices"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m (New page: === Summing Devices === If you have a stereo device (and do not the extra features of a mixer then you can consider a summing device). The following notes are not specific recommendations...)
 
m
 
(18 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
=== Summing Devices ===
 
=== Summing Devices ===
−
If you have a stereo device (and do not the extra features of a mixer then you can consider a summing device).  The following notes are not specific recommendations or endorsements.
+
If you have a stereo source (and do not require the features of a mixer) then you can consider a summing device.  Except where noted: the following notes are not specific recommendations or endorsements.
  
−
==== ⅛ stereo source ====
+
==== XLR stereo source ====
−
If your source is a ⅛ stereo jack you can use something like this:
+
[[Image:XLRToXLR.png|thumb|200px|left|XLR outputs]]
 +
If your source is two XLR jacks you can use something like this:
 +
 
 +
{{#Click:http://www.audiopile.net/products/Electronics/MCB-201/MCB-201_cutsheet.shtml|Image:MCB-201Input.png|300px|EWI MCB-201 2 Microphone Combiner}}{{#Click:http://www.audiopile.net/products/Electronics/MCB-201/MCB-201_cutsheet.shtml|Image:MCB-201Output.png|300px|EWI MCB-201 2 Microphone Combiner}}
 +
 
 +
 
 +
[http://www.audiopile.net/products/Electronics/MCB-201/MCB-201_cutsheet.shtml EWI MCB-201 2 Microphone Combiner]
 +
 
 +
<section begin=XLROutput />
 +
The output side is XLR so you will also need a converter or cable that is XLR female to Balanced &frac14; inch jack Tip-Ring-Sleeve.
 +
 
 +
{{#Click:http://www.audiopile.net/products/Mic_Instr_Cables/MP_Adaptor_Cbls/MP-105/MP-105_cutsheet.shtml|Image:XLRtoTRS.png|300px|Female XLR to 1/4" Male TRS Balanced Adaptor Cable.}}
 +
 
 +
[http://www.audiopile.net/products/Mic_Instr_Cables/MP_Adaptor_Cbls/MP-105/MP-105_cutsheet.shtml Female XLR to 1/4" Male TRS Balanced Adaptor Cable (audiopile.net)]
 +
<section end=XLROutput />
 +
 
 +
==== &#8539; (3.5 mm) stereo source ====
 +
[[Image:18MaleToMale.png|thumb|200px|left|&#8539; inch (3.5 mm) stereo jack]]
 +
If your source is a &#8539; (3.5 mm) stereo jack you can use something like this:
 +
<!--
 +
{{#Click:Target|Image:Example.png|300px|Caption is here.}}
 +
-->
 +
 
 +
{{#Click:http://whirlwindusa.com/catalog/black-boxes-effects-and-dis/transformers-isolation-devices/isopod|Image:WhirlwindIsopod.png|300px|Whirlwind Isopod.}}
  
−
[[Image:WhirlwindIsopod.png]]
 
  
 
[http://whirlwindusa.com/catalog/black-boxes-effects-and-dis/transformers-isolation-devices/isopod Whirlwind Isopod]
 
[http://whirlwindusa.com/catalog/black-boxes-effects-and-dis/transformers-isolation-devices/isopod Whirlwind Isopod]
  
−
The output side is XLR so you will also need a converter or cable that is XLR femail to Balanced &frac14; inch jack Tip-Ring-Sleeve.
 
  
−
[[Image:XLRtoTRS.png]]
+
{{#lst:Template:Summing Devices|XLROutput}}
−
 
 
−
[http://www.audiopile.net/products/Mic_Instr_Cables/MP_Adaptor_Cbls/MP-105/MP-105_cutsheet.shtml Female XLR to 1/4" Male TRS
 
−
Balanced Adaptor Cable]
 
  
 
Thanks to Richard Mills for the suggestion.
 
Thanks to Richard Mills for the suggestion.
  
 
==== RCA stereo source ====
 
==== RCA stereo source ====
 +
[[Image:RCAMaletoRCAMale.png|thumb|200px|left|RCA Stereo]]
 
If your source is stereo RCA you can use something like this:
 
If your source is stereo RCA you can use something like this:
  
−
[[Image:WhirlwindpcDI.png]]
+
{{#Click:http://whirlwindusa.com/catalog/black-boxes-effects-and-dis/direct-boxes/pcdi|Image:WhirlwindpcDI.png|300px|Whirlwind pcDI.}}<br>
 +
[http://whirlwindusa.com/catalog/black-boxes-effects-and-dis/direct-boxes/pcdi| Whirlwind pcDI]
  
−
[http://whirlwindusa.com/catalog/black-boxes-effects-and-dis/direct-boxes/pcdi Whirlwind pcDI]
+
{{#lst:Template:Summing Devices|XLROutput}}
  
 
OR
 
OR
  
−
[[Image:ProCoiFace.png]]
+
{{#Click:http://www.procosound.com/iface|Image:ProCoiFace.png|300px|proco iFace.}}
 +
 
 +
[http://www.procosound.com/iface ProCo iFace]
 +
 
 +
{{#lst:Template:Summing Devices|XLROutput}}
  
−
[http://www.procosound.com/iface proco iFace]
 
  
 
Thanks to Dan Rosebach for the suggestion.
 
Thanks to Dan Rosebach for the suggestion.
 +
 +
==== Do It Yourself ====
 +
You can find schematics to build your own here: [http://www.rane.com/note109.html Why Not Wye]
 +
 
----
 
----
 
[[Category:Model 1S]]
 
[[Category:Model 1S]]
 
[[Category:Model II]]
 
[[Category:Model II]]
 
[[Category:Connections]]
 
[[Category:Connections]]

Latest revision as of 01:22, 14 July 2014

Summing Devices

If you have a stereo source (and do not require the features of a mixer) then you can consider a summing device. Except where noted: the following notes are not specific recommendations or endorsements.

XLR stereo source

XLR outputs

If your source is two XLR jacks you can use something like this:

{{#Click:http://www.audiopile.net/products/Electronics/MCB-201/MCB-201_cutsheet.shtml%7CImage:MCB-201Input.png%7C300px%7CEWI MCB-201 2 Microphone Combiner}}{{#Click:http://www.audiopile.net/products/Electronics/MCB-201/MCB-201_cutsheet.shtml%7CImage:MCB-201Output.png%7C300px%7CEWI MCB-201 2 Microphone Combiner}}


EWI MCB-201 2 Microphone Combiner


The output side is XLR so you will also need a converter or cable that is XLR female to Balanced ¼ inch jack Tip-Ring-Sleeve.

{{#Click:http://www.audiopile.net/products/Mic_Instr_Cables/MP_Adaptor_Cbls/MP-105/MP-105_cutsheet.shtml%7CImage:XLRtoTRS.png%7C300px%7CFemale XLR to 1/4" Male TRS Balanced Adaptor Cable.}}

Female XLR to 1/4" Male TRS Balanced Adaptor Cable (audiopile.net)


⅛ (3.5 mm) stereo source

⅛ inch (3.5 mm) stereo jack

If your source is a ⅛ (3.5 mm) stereo jack you can use something like this:

{{#Click:http://whirlwindusa.com/catalog/black-boxes-effects-and-dis/transformers-isolation-devices/isopod%7CImage:WhirlwindIsopod.png%7C300px%7CWhirlwind Isopod.}}


Whirlwind Isopod


The output side is XLR so you will also need a converter or cable that is XLR female to Balanced ¼ inch jack Tip-Ring-Sleeve.

{{#Click:http://www.audiopile.net/products/Mic_Instr_Cables/MP_Adaptor_Cbls/MP-105/MP-105_cutsheet.shtml%7CImage:XLRtoTRS.png%7C300px%7CFemale XLR to 1/4" Male TRS Balanced Adaptor Cable.}}

Female XLR to 1/4" Male TRS Balanced Adaptor Cable (audiopile.net)


Thanks to Richard Mills for the suggestion.

RCA stereo source

RCA Stereo

If your source is stereo RCA you can use something like this:

{{#Click:http://whirlwindusa.com/catalog/black-boxes-effects-and-dis/direct-boxes/pcdi%7CImage:WhirlwindpcDI.png%7C300px%7CWhirlwind pcDI.}}
Whirlwind pcDI


The output side is XLR so you will also need a converter or cable that is XLR female to Balanced ¼ inch jack Tip-Ring-Sleeve.

{{#Click:http://www.audiopile.net/products/Mic_Instr_Cables/MP_Adaptor_Cbls/MP-105/MP-105_cutsheet.shtml%7CImage:XLRtoTRS.png%7C300px%7CFemale XLR to 1/4" Male TRS Balanced Adaptor Cable.}}

Female XLR to 1/4" Male TRS Balanced Adaptor Cable (audiopile.net)


OR

{{#Click:http://www.procosound.com/iface%7CImage:ProCoiFace.png%7C300px%7Cproco iFace.}}

ProCo iFace


The output side is XLR so you will also need a converter or cable that is XLR female to Balanced ¼ inch jack Tip-Ring-Sleeve.

{{#Click:http://www.audiopile.net/products/Mic_Instr_Cables/MP_Adaptor_Cbls/MP-105/MP-105_cutsheet.shtml%7CImage:XLRtoTRS.png%7C300px%7CFemale XLR to 1/4" Male TRS Balanced Adaptor Cable.}}

Female XLR to 1/4" Male TRS Balanced Adaptor Cable (audiopile.net)


Thanks to Dan Rosebach for the suggestion.

Do It Yourself

You can find schematics to build your own here: Why Not Wye

Retrieved from "https://toonz.ca/bose/wiki/index.php?title=Template:Summing_Devices&oldid=16606"