Difference between revisions of "T1® Stereo Sources"
m |
m |
||
| Line 18: | Line 18: | ||
;Correction - use a cable like this | ;Correction - use a cable like this | ||
| − | [[Image:18TRSto2x14TS.png] | + | [[Image:18TRSto2x14TS.png]] |
| + | |||
[[Image:T1SingerSongWriterP38.png]] | [[Image:T1SingerSongWriterP38.png]] | ||
Revision as of 16:10, 21 November 2014
To connect a stereo source to a T1 ToneMatch Audio Engine see: Backing Tracks
Warning about Cables
If you use a cable like this to connect a stereo source to the T1 ToneMatch Audio Engine
- In Channels 1,2,3 you will hear only one side of the stereo source
- In Channels 4 or 5 the left and right channels from the source will tend to cancel each other out and you will get little or no output.
Corrections to the T1® Owners Guide pages 38 and 40
From the original diagrams it looks like this kind of cable may work.
- Correction - use a cable like this
Original page (red x indicates error)
- Correction - use a cable like this
Original page (red x indicates error)
- Correction - use a cable like this
