Difference between revisions of "T1® Stereo Sources"
m |
m |
||
| Line 2: | Line 2: | ||
---- | ---- | ||
| + | |||
Corrections to the [http://products.bose.com/pdf/customer_service/owners/t1_tonematch_audio_engine.pdf T1® Owners Guide] pages 38 and 40 | Corrections to the [http://products.bose.com/pdf/customer_service/owners/t1_tonematch_audio_engine.pdf T1® Owners Guide] pages 38 and 40 | ||
| Line 14: | Line 15: | ||
Original page (red x indicates error) | Original page (red x indicates error) | ||
| − | [[Image:T1SingerSongWriterP38Original.png]] | + | [[Image:T1SingerSongWriterP38Original.png|800px]] |
| − | ;Correction - use a cable like this | + | ;Correction - use a cable like this connected to {{T1}} Channels 4/5 |
[[Image:18TRSto2x14TS.png]] | [[Image:18TRSto2x14TS.png]] | ||
| Line 24: | Line 25: | ||
Original page (red x indicates error) | Original page (red x indicates error) | ||
| − | [[Image:T1DJPlaybackP40Original.png]] | + | [[Image:T1DJPlaybackP40Original.png|800px]] |
| − | ;Correction - use a cable like this | + | ;Correction - use a cable like this connected to {{T1}} Channels 4/5 |
[[Image:18TRSto2x14TS.png]] | [[Image:18TRSto2x14TS.png]] | ||
Revision as of 16:14, 21 November 2014
To connect a stereo source to a T1 ToneMatch Audio Engine see: Backing Tracks
Warning about Cables
If you use a cable like this to connect a stereo source to the T1 ToneMatch Audio Engine
- In Channels 1,2,3 you will hear only one side of the stereo source
- In Channels 4 or 5 the left and right channels from the source will tend to cancel each other out and you will get little or no output.
Corrections to the T1® Owners Guide pages 38 and 40
From the original diagrams it looks like this kind of cable may work.
- Correction - use a cable like this
Original page (red x indicates error)
- Correction - use a cable like this connected to T1 ToneMatch Audio Engine Channels 4/5
Original page (red x indicates error)
- Correction - use a cable like this connected to T1 ToneMatch Audio Engine Channels 4/5
