Difference between revisions of "Template:T1 ToneMatch® Audio Engine to Model II and Compact"
m |
m |
||
Line 24: | Line 24: | ||
;Compact | ;Compact | ||
Connect the Compact with a ¼ inch jack Tip-Ring-Sleeve cable | Connect the Compact with a ¼ inch jack Tip-Ring-Sleeve cable | ||
− | * T1® Master Output to the {{Compact}} Channel 2 input. <br>[[Image:Compact Channel 2 Line | + | * T1® Master Output to the {{Compact}} Channel 2 input. <br>[[Image:Compact Channel 2 Line Level2.png]] |
− | ** Set the Channel 2 volume | + | ** Set the Channel 2 volume "5" and adjust as necessary to get a good balance with the other system. |
+ | ** If you are seeing red on the Channel 2 LED light, turn down the volume on the Compact. | ||
+ | ** If you are using Compact Channel 1, turn the Channel 1 volume all the way off. | ||
** For best results use a Tip-Ring-Sleeve (balanced) connection. <br />[[Image:TrsMtrsM.png]]<br />You can use a Tip-Sleeve (unbalanced connection) but the Tip-Ring-Sleeve (balanced connection is preferred). | ** For best results use a Tip-Ring-Sleeve (balanced) connection. <br />[[Image:TrsMtrsM.png]]<br />You can use a Tip-Sleeve (unbalanced connection) but the Tip-Ring-Sleeve (balanced connection is preferred). | ||
</td></tr> | </td></tr> |
Revision as of 14:19, 7 March 2015
Usage:
{{T1 ToneMatch® Audio Engine to Two L1®s |Model=Model II }}
Please note: Bose recommends that if you have two Model 1S systems using the same source, that you place the Model 1S systems at least 20 feet apart (6 meters). This is to avoid Multiple Source Interference
Running a Model 1S system and L1 Compactwith the same source is running Dual Mono and not recommended unless the L1®s are at least 20 feet apart.
Connect the first system with the ToneMatch cable that came with the T1®.
|
Connect the Compact with a ¼ inch jack Tip-Ring-Sleeve cable
|