Difference between revisions of "Template:T1 ToneMatch® Audio Engine to Model II and Compact"
m |
m (ST moved page Template:T1 ToneMatch® Audio Engine to Model II and Compact to Template:T1 ToneMatch® Audio Engine to Model II and Compact) |
||
(7 intermediate revisions by the same user not shown) | |||
Line 8: | Line 8: | ||
</noinclude> | </noinclude> | ||
{{T1 icon}}{{Model 1S icon}}{{Model II icon}}{{Compact icon}} | {{T1 icon}}{{Model 1S icon}}{{Model II icon}}{{Compact icon}} | ||
+ | <html><div style="padding:15px; margin:10px; max-width:500px;"></html> | ||
<big> | <big> | ||
− | Please note: Bose recommends that if you have two | + | Please note: Bose recommends that if you have two full sized L1® systems using the same source, that you place those systems at least 20 feet apart (6 meters). This is to avoid [[Multiple_Source_Interference|Multiple Source Interference]]. |
</big> | </big> | ||
− | + | <html></div></html> | |
− | Running a {{{Model|Model 1S}}} system and {{Compact}}with the same source | + | Running a {{{Model|Model 1S}}} system and {{Compact}} with the same source ([[Dual Mono]]) is not recommended unless the L1®s are at least 20 feet apart. Also, when using a full sized L1® and a Compact, if the Compact is really close to the full sized system, you may not notice much of the sound of the Compact. |
[[Image:T1TwoModelIIandCompact.png]] | [[Image:T1TwoModelIIandCompact.png]] | ||
Line 24: | Line 25: | ||
;Compact | ;Compact | ||
Connect the Compact with a ¼ inch jack Tip-Ring-Sleeve cable | Connect the Compact with a ¼ inch jack Tip-Ring-Sleeve cable | ||
− | * T1® Master Output to the {{Compact}} Channel 2 input. <br>[[Image:Compact Channel 2 Line | + | * T1® Master Output to the {{Compact}} Channel 2 input. <br>[[Image:Compact Channel 2 Line Level2.png]] |
− | ** Set the Channel 2 volume | + | ** Set the Channel 2 volume "5" and adjust as necessary to get a good balance with the other system. |
+ | ** If you are seeing red on the Channel 2 LED light, turn down the volume on the Compact. | ||
+ | ** If you not are using Compact Channel 1, turn the Channel 1 volume all the way off. | ||
** For best results use a Tip-Ring-Sleeve (balanced) connection. <br />[[Image:TrsMtrsM.png]]<br />You can use a Tip-Sleeve (unbalanced connection) but the Tip-Ring-Sleeve (balanced connection is preferred). | ** For best results use a Tip-Ring-Sleeve (balanced) connection. <br />[[Image:TrsMtrsM.png]]<br />You can use a Tip-Sleeve (unbalanced connection) but the Tip-Ring-Sleeve (balanced connection is preferred). | ||
</td></tr> | </td></tr> | ||
</table> | </table> | ||
− | + | <!-- | |
==Stereo == | ==Stereo == | ||
{{:T1 ToneMatch® Audio Engine / Stereo Output to Two L1®s}} | {{:T1 ToneMatch® Audio Engine / Stereo Output to Two L1®s}} | ||
+ | --> | ||
---- | ---- | ||
[[Category:T1]] | [[Category:T1]] |
Latest revision as of 03:43, 26 March 2017
Usage:
{{T1 ToneMatch® Audio Engine to Two L1®s |Model=Model II }}
Please note: Bose recommends that if you have two full sized L1® systems using the same source, that you place those systems at least 20 feet apart (6 meters). This is to avoid Multiple Source Interference.
Running a Model 1S system and L1 Compact with the same source (Dual Mono) is not recommended unless the L1®s are at least 20 feet apart. Also, when using a full sized L1® and a Compact, if the Compact is really close to the full sized system, you may not notice much of the sound of the Compact.
Connect the first system with the ToneMatch cable that came with the T1®.
|
Connect the Compact with a ¼ inch jack Tip-Ring-Sleeve cable
|