Difference between revisions of "Template:T4S/T8S Aux Inputs"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
(Created page with "link=http://toonz.ca/bose/wiki/images/T4ST8S/AM801203_00_EN_viewable.pdf|640px The T4S (5/6) and T8S (9/10) Aux Inputs are routed directl...")
 
m
Line 1: Line 1:
 +
<noinclude>
 +
==Usage==
 +
<nowiki>{{</nowiki>'''ToneMatch Aux'''
 +
 +
|'''Mixer=''' ''T4S ToneMatch mixer or T8S ToneMatch mixer''
 +
 +
|'''AuxInputs=''' ''4/5 or 9/10''
 +
 +
|'''MaxChannels=''' ''four'' or ''eight''
 +
 +
 +
|discussion page = link to forum discussion (optional) e.g. [http://bose.infopop.cc/eve/forums/a/tpc/f/1506041054/m/4440014176 discussion in the Bose Message Board]
 +
 +
<nowiki>}}</nowiki>
 +
 +
Template will render as it appears below this line.
 +
 +
----
 +
</noinclude>
 +
 +
Bose engineered the {{{Mixer|T4S/T8S ToneMatch mixers}}}  to have {{{MaxChannels|four (T4s) / eight (T8S)}}} full-function channels and two '''Aux'''iliary inputs. The Aux inputs {{{AuxInputs|5/6 (T4S) or 9/10 (T8S)}}} are routed directly to the Main Output.  You can use the Pan and Level adjustments accessible through the PAN/AUX menu. There are no changes to routing, or signal processing available. Only {{{Mixer|T4S/T8S}}} channels one through {{{MaxChannels|four (T4S) / eight (T8S}}} can be routed to the Aux Outputs.
 +
 +
 
[[File:T4S Rotary Selector Aux.jpg|link=http://toonz.ca/bose/wiki/images/T4ST8S/AM801203_00_EN_viewable.pdf|640px]]
 
[[File:T4S Rotary Selector Aux.jpg|link=http://toonz.ca/bose/wiki/images/T4ST8S/AM801203_00_EN_viewable.pdf|640px]]
  
−
The T4S (5/6) and T8S (9/10) Aux Inputs are routed directly to the Master Output.
+
The Aux inputs are useful for sources that have their own volume and signal processing (e.g. EQ or effects). They are similar to an effects return channel on other mixers.  Use the Master Volume to raise and lower the volume of the Aux inputs in sync with the other channels. To change the volume of the Aux inputs relative to the other inputs you can use the AUX/PAN Level (soft menu), or on the source device.
 +
 
 +
[[File:T4S Pan Aux.jpg|640px|link=http://toonz.ca/bose/wiki/images/T4ST8S/AM801203_00_EN_viewable.pdf]]
  
−
We cannot route them to different channels or Aux outputs. You can control Pan and Level sent through to Master.
 
  
−
[[File:T4S Pan Aux.jpg|640px|link=http://toonz.ca/bose/wiki/images/T4ST8S/AM801203_00_EN_viewable.pdf]]
 
  
−
There is no other processing available (e.g. Presets, EQ, Effects).
+
<!-- <noinclude>  -->
 +
----
 +
[[Category:T4S]]
 +
[[Category:T8S]]
 +
[[Category:Aux]]
 +
<!-- </noinclude>  -->

Revision as of 17:11, 18 July 2018

Usage

{{ToneMatch Aux

|Mixer= T4S ToneMatch mixer or T8S ToneMatch mixer

|AuxInputs= 4/5 or 9/10

|MaxChannels= four or eight


|discussion page = link to forum discussion (optional) e.g. discussion in the Bose Message Board

}}

Template will render as it appears below this line.


Bose engineered the T4S/T8S ToneMatch mixers to have four (T4s) / eight (T8S) full-function channels and two Auxiliary inputs. The Aux inputs 5/6 (T4S) or 9/10 (T8S) are routed directly to the Main Output. You can use the Pan and Level adjustments accessible through the PAN/AUX menu. There are no changes to routing, or signal processing available. Only T4S/T8S channels one through four (T4S) / eight (T8S can be routed to the Aux Outputs.


T4S Rotary Selector Aux.jpg

The Aux inputs are useful for sources that have their own volume and signal processing (e.g. EQ or effects). They are similar to an effects return channel on other mixers. Use the Master Volume to raise and lower the volume of the Aux inputs in sync with the other channels. To change the volume of the Aux inputs relative to the other inputs you can use the AUX/PAN Level (soft menu), or on the source device.

T4S Pan Aux.jpg


Retrieved from "https://toonz.ca/bose/wiki/index.php?title=Template:T4S/T8S_Aux_Inputs&oldid=19700"