Difference between revisions of "T4S to RCA Inputs"
m |
m |
||
| Line 11: | Line 11: | ||
See: [https://huisr0t.wordpress.com/2014/02/25/10dbv-and-4dbu-voltage-levels/ -10dBv and +4dBu voltage levels] | See: [https://huisr0t.wordpress.com/2014/02/25/10dbv-and-4dbu-voltage-levels/ -10dBv and +4dBu voltage levels] | ||
| − | + | <!-- | |
|Cause = | |Cause = | ||
| + | --> | ||
|Categories = | |Categories = | ||
[[Category:T4S]] | [[Category:T4S]] | ||
Revision as of 09:39, 6 September 2018
Contents
Issue
Can I connect the Master Outputs from my T4S ToneMatch mixer to RCA phono inputs on a mixer?
Environment
The house system at a gig has only RCA phono inputs.
Resolution
RCA phono inputs are usually consumer level inputs: -10dBv. Your T4S outputs are pro audio level: +4dBu. The outputs of the T4S will likely be 11.79 dB higher than the RCA phono inputs were designed to handle. This may still all work, but you may have to keep the T4S Master Output lower than usual to avoid distortion.
See: -10dBv and +4dBu voltage levels
Cause
Not applicable to the resolution for this issue
Related discussion Stereo Out or Not