Difference between revisions of "S1 Pro System LEDs"
m (formatting) |
m |
||
| Line 81: | Line 81: | ||
<td>Less than 10% charge</td> | <td>Less than 10% charge</td> | ||
</tr> | </tr> | ||
| + | <!-- | ||
<tr> | <tr> | ||
<td>Solid Red</td> | <td>Solid Red</td> | ||
<td>Battery depleted. </td> | <td>Battery depleted. </td> | ||
</tr> | </tr> | ||
| + | --> | ||
</tbody> | </tbody> | ||
</table> | </table> | ||
Revision as of 01:33, 20 October 2018
S1 LED status
Power LED
There are two power related LEDs: Power on the front of the system and Battery Status on the back of the system next to the power switch.
| Off | System is off |
| Blue | System is on |
| Red | System fault |
Bluetooth LED
The Bluetooth LED is located on the Bluetooth button under Input 3 on the connection / control panel.
| Off | Bluetooth is off |
| White (flashing) | Pairing mode / connecting |
| White (solid) | Connected to Bluetooth device |
Signal LED
There are 3 signal LEDs: one above the volume knob for Inputs 1, 2 and 3.
| Off | No or low level signal present |
| Green | Signal present |
| Red | Signal clipping |
Battery LED indicator
If using the optional battery accessory, the LED next to the system power switch shows the battery's charge state by flashing when powered on. To check the charge at any time, double-press the
Bluetooth button in the Input 3 section.
| Blue - 4 flashes | 75 - 100% charge |
| Blue - 3 flashes | 50 - 74% charge |
| Blue - 2 flashes | 25 - 49% charge |
| Blue - 1 flash | 10 - 24% charge |
| Red - 1 flash | Less than 10% charge |