Difference between revisions of "Template:S1 Pro Channel 3 Volume"
(Created page with "The {{S1}} channel 3 volume control behaves differently than the volume controls on channels 1 and 2. This affects the sound connected to the Aux input and Bluetooth streamin...") |
m |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
The {{S1}} channel 3 volume control behaves differently than the volume controls on channels 1 and 2. | The {{S1}} channel 3 volume control behaves differently than the volume controls on channels 1 and 2. | ||
| + | |||
| + | === Slow to Respond === | ||
| + | If you find the volume control seems slow to respond (especially between 7-11 o'clock) please turn up the volume at the source (Bluetooth or physical connection). | ||
| + | |||
| + | For Bluetooth connections, if you set the volume on the source device to maximum, this will give you the greatest usable range on the S1 Pro Aux Channel volume control. | ||
| + | |||
| + | [[File:S1 Pro Channel 3.jpg|400px|link=""|S1 Pro Channel 3]] | ||
| + | |||
| + | ===Steps in Volume=== | ||
| + | The S1 Pro has a digital gain knob on channel 3 which is divided into incremental steps. When you slowly turn the volume knob up with a strong input signal present, you may hear steps in loudness. | ||
| + | |||
| + | We are aware of this behavior and it is not a symptom of a fault or malfunction. | ||
| + | |||
| + | === Volume Cut Off === | ||
| + | |||
This affects the sound connected to the Aux input and Bluetooth streaming. | This affects the sound connected to the Aux input and Bluetooth streaming. | ||
| − | [[File:S1 Pro Channel 3 Volume.jpg]] | + | [[File:S1 Pro Channel 3 Volume.jpg|640px]] |
| − | The sound stops at about 8:00 o'clock although it appears that should happen at 7:00 o'clock on the dial. | + | The sound stops at about 8:00 o'clock although it appears that should happen at 7:00 o'clock on the dial. The transition to silence |
| + | * will be smoother when the source signal is low | ||
| + | * will be more abrupt when the source signal is high | ||
This is normal for this control. | This is normal for this control. | ||
| + | |||
| + | The control is digital (functioning in steps). With a low signal source, the change you hear for each step will be small. With a high signal source, the change you hear for each step will be larger. | ||
---- | ---- | ||
[[Category:S1]] | [[Category:S1]] | ||
Latest revision as of 13:26, 1 March 2019
The S1 Pro System channel 3 volume control behaves differently than the volume controls on channels 1 and 2.
Slow to Respond
If you find the volume control seems slow to respond (especially between 7-11 o'clock) please turn up the volume at the source (Bluetooth or physical connection).
For Bluetooth connections, if you set the volume on the source device to maximum, this will give you the greatest usable range on the S1 Pro Aux Channel volume control.
Steps in Volume
The S1 Pro has a digital gain knob on channel 3 which is divided into incremental steps. When you slowly turn the volume knob up with a strong input signal present, you may hear steps in loudness.
We are aware of this behavior and it is not a symptom of a fault or malfunction.
Volume Cut Off
This affects the sound connected to the Aux input and Bluetooth streaming.
The sound stops at about 8:00 o'clock although it appears that should happen at 7:00 o'clock on the dial. The transition to silence
- will be smoother when the source signal is low
- will be more abrupt when the source signal is high
This is normal for this control.
The control is digital (functioning in steps). With a low signal source, the change you hear for each step will be small. With a high signal source, the change you hear for each step will be larger.