Difference between revisions of "Crossover with Line Out"
m (clarification of terms and formatting) |
m |
||
Line 1: | Line 1: | ||
{{B2 icon}}{{B1 icon}}{{A1 icon}}{{Compact icon}}{{S1 icon}} | {{B2 icon}}{{B1 icon}}{{A1 icon}}{{Compact icon}}{{S1 icon}} | ||
− | ;Can I add a | + | ;Can I add a Bose bass module like a {{B1}} or {{B2}} to an {{Compact}} or {{S1}} |
: The Line Out from the {{Compact}} and {{S1}} is full range. The {{B1}} and {{B2}} are designed to work with a signal from 40 Hz to 200 Hz, and preferably with an EQ curve set in the {{Model 1S}} or {{Model II}} Power Stand. | : The Line Out from the {{Compact}} and {{S1}} is full range. The {{B1}} and {{B2}} are designed to work with a signal from 40 Hz to 200 Hz, and preferably with an EQ curve set in the {{Model 1S}} or {{Model II}} Power Stand. |
Revision as of 02:02, 20 March 2019
- Can I add a Bose bass module like a B1 Bass Module or B2 Bass Module to an L1 Compact or S1 Pro System
- The Line Out from the L1 Compact and S1 Pro System is full range. The B1 Bass Module and B2 Bass Module are designed to work with a signal from 40 Hz to 200 Hz, and preferably with an EQ curve set in the L1 Model 1S or L1 Model II Power Stand.
If you add a PackLite® power amplifier model A1 and B1 Bass Module or B2 Bass Module to an L1 Compact or S1 Pro System you will need a crossover between the Line Out and the PackLite® power amplifier model A1.
Check out these discussions in the community.
The Compact and the B2, via the A1 and the Rolls SX21