Difference between revisions of "Template:ToneMatch Mixer Backing Tracks"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m (interim)
m (→‎iPad or iPod)
 
(17 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
<noinclude>
 
<noinclude>
 
==Usage==
 
==Usage==
−
<nowiki>{{</nowiki>'''S1 Pro with External Device'''
+
<nowiki>{{</nowiki>'''ToneMatch Mixer Backing Tracks'''
  
 
|'''SourceDevice=''' an iPad, iPod, Tablet, Computer
 
|'''SourceDevice=''' an iPad, iPod, Tablet, Computer
  
−
|'''DeviceLink=''' Short form name of the device T4S or T8S
+
|'''DeviceLink=''' [[T4S]] or [[T8S]]
  
 
|'''Device=''' name of the device eg {{T4S}} {{T8S}}  
 
|'''Device=''' name of the device eg {{T4S}} {{T8S}}  
Line 14: Line 14:
  
 
|discussion page = link to forum discussion (optional) e.g. [http://bose.infopop.cc/eve/forums/a/tpc/f/1506041054/m/4440014176 discussion in the Bose Message Board]
 
|discussion page = link to forum discussion (optional) e.g. [http://bose.infopop.cc/eve/forums/a/tpc/f/1506041054/m/4440014176 discussion in the Bose Message Board]
 +
 
<nowiki>}}</nowiki>
 
<nowiki>}}</nowiki>
 
Template will render as it appears below this line.
 
Template will render as it appears below this line.
Line 20: Line 21:
 
</noinclude>
 
</noinclude>
 
<includeonly>
 
<includeonly>
−
'''<big>Connecting {{{SourceDevice|an iPad, iPod, Tablet, or Computer}}} to a {{{{{DeviceLink|T4S}}}}}</big>'''
+
'''<big>Connecting {{{SourceDevice|an iPad, iPod, Tablet, or Computer}}} to a {{{DeviceLink|[[T4S]]}}} ToneMatch® mixer</big>'''
 
</includeonly>
 
</includeonly>
  
−
===== Analog Connections =====
+
== Analog Connections ==
 +
=== Aux Inputs ===
 
Connect to the Aux Inputs to leave the combo jack inputs available. The Aux inputs are routed directly to the Main outputs. You can set Pan and Level using the Rotary Selector '''PAN/AUX''' settings
 
Connect to the Aux Inputs to leave the combo jack inputs available. The Aux inputs are routed directly to the Main outputs. You can set Pan and Level using the Rotary Selector '''PAN/AUX''' settings
  
 
{{{ImageAuxIn|[[File:Backtracks to T4S 56.png|600px]]}}}
 
{{{ImageAuxIn|[[File:Backtracks to T4S 56.png|600px]]}}}
  
 +
=== Combo Inputs ===
 
If you need to use Presets, Effects, or the physical volume controls, connect to the last two channels that have combo inputs.
 
If you need to use Presets, Effects, or the physical volume controls, connect to the last two channels that have combo inputs.
  
Line 33: Line 36:
  
  
−
'''Details about the Stereo to Mono Adapter ''' {{:Stereo Mini to 1/4}}
+
===Stereo to Left/Right Adapter ===
  
 +
Plug this into your source device: {{{SourceDevice|an iPad, iPod, Tablet, Computer}}} (headphone or line out jack). Connect:
 +
* 1/8 inch (3 mm) Tip-Ring-Sleeve jack on the source device and
 +
* Colored ends to the {{{Device|T4S}}}
 +
 +
[[File:StereoMiniTo14.gif|link=http://www.amazon.com/HOSA-CMP159-Stereo-Phone-Y-Cable/dp/B000068O3C/ref=pd_sim_e_1/178-7040482-5196650|280px|Hosa CMP159]]
 +
 +
Source: [http://www.amazon.com/HOSA-CMP159-Stereo-Phone-Y-Cable/dp/B000068O3C/ref=pd_sim_e_1/178-7040482-5196650 Hosa CMP159]
 +
 +
<!--
 
For details about the settings on the {{T1 nl}} see:  
 
For details about the settings on the {{T1 nl}} see:  
−
 
+
-->
 
[[T1 ToneMatch® Audio Engine / Gain Staging / Prerecorded music on Channel 4/5]]
 
[[T1 ToneMatch® Audio Engine / Gain Staging / Prerecorded music on Channel 4/5]]
  
 
===== iPad or iPod =====
 
===== iPad or iPod =====
 +
{{Apple Lightning to 3.5 mm}}
 +
 +
 +
You can use just one input on the source device: {{{SourceDevice|an iPad, iPod, Tablet, Computer}}} if you can set the source device output to mono. Typically, you can do this under Accessibility options.
 +
 +
Set your iPad or iPhone to Mono
 +
 +
Launch the Settings app on your iPad or iPhone.
 +
 +
#    Tap General.
 +
#    Tap Accessibility.
 +
#    In the Hearing section, turn Mono Audio On
 +
 +
Then use a cable like this but connect only one end (red or grey) to one of the combo jacks on the ToneMatch mixer.  This will give you both sides of the stereo track (combined to mono).
 +
 +
[[File:StereoMiniTo14.gif|link=http://www.amazon.com/HOSA-CMP159-Stereo-Phone-Y-Cable/dp/B000068O3C/ref=pd_sim_e_1/178-7040482-5196650|280px|Hosa CMP159]]
 +
 +
Source: [http://www.amazon.com/HOSA-CMP159-Stereo-Phone-Y-Cable/dp/B000068O3C/ref=pd_sim_e_1/178-7040482-5196650 Hosa CMP159]
 +
 +
<!--
 
{{IOS Mono}}
 
{{IOS Mono}}
 +
-->
  
−
===== Connecting via USB =====
+
== USB B Connection from Computer ==
 +
=== T8S/T4S ===
 +
{{T8S USB from PC}}
 +
=== {{T1}} ===
 
Please see: [[T1 ToneMatch® Audio Engine / USB]]
 
Please see: [[T1 ToneMatch® Audio Engine / USB]]
 +
 +
 +
----
 +
[[Category:{{{Device|T4S}}}]]
 +
[[Category:Backing Tracks]]

Latest revision as of 03:09, 27 August 2019

Usage

{{ToneMatch Mixer Backing Tracks

|SourceDevice= an iPad, iPod, Tablet, Computer

|DeviceLink= T4S or T8S

|Device= name of the device eg T4S ToneMatch mixer T8S ToneMatch mixer

|ImageAuxIn= image for Aux Inputs eg [[File:Backtracks_to_T4S_56.png|600px]]

|ImageLastChannelsIn= image for Aux Inputs eg [[File:Backtracks to T4S 34.png|600px]]

|discussion page = link to forum discussion (optional) e.g. discussion in the Bose Message Board

}} Template will render as it appears below this line.


Analog Connections

Aux Inputs

Connect to the Aux Inputs to leave the combo jack inputs available. The Aux inputs are routed directly to the Main outputs. You can set Pan and Level using the Rotary Selector PAN/AUX settings

Backtracks to T4S 56.png

Combo Inputs

If you need to use Presets, Effects, or the physical volume controls, connect to the last two channels that have combo inputs.

Backtracks to T4S 34.png


Stereo to Left/Right Adapter

Plug this into your source device: an iPad, iPod, Tablet, Computer (headphone or line out jack). Connect:

  • 1/8 inch (3 mm) Tip-Ring-Sleeve jack on the source device and
  • Colored ends to the T4S

Hosa CMP159

Source: Hosa CMP159

T1 ToneMatch® Audio Engine / Gain Staging / Prerecorded music on Channel 4/5

iPad or iPod

If your Apple device does not have a headphone output, consider using the Apple Lightning to 3.5mm Headphone Adapter.

Lightning to 3.5 mm.jpg


You can use just one input on the source device: an iPad, iPod, Tablet, Computer if you can set the source device output to mono. Typically, you can do this under Accessibility options.

Set your iPad or iPhone to Mono

Launch the Settings app on your iPad or iPhone.

  1. Tap General.
  2. Tap Accessibility.
  3. In the Hearing section, turn Mono Audio On

Then use a cable like this but connect only one end (red or grey) to one of the combo jacks on the ToneMatch mixer. This will give you both sides of the stereo track (combined to mono).

Hosa CMP159

Source: Hosa CMP159


USB B Connection from Computer

T8S/T4S

Documentation Update

USB B from PC and USB A can be directed to:

  • None
  • Aux In
  • Channel 3 or 4 (T4S) ⇐ New
  • Channel 7 or 8 (T4S) ⇐ New
  • Master

Settings for USB B from PC are also applied to USB A Playback.

T4S T8S USB from PC.jpg

USB B from PC to Aux

If you have questions or comments on this video please see this discussion in the Bose Pro Portable PA Community

USB B from PC to Channels

If you have questions or comments on this video please see this discussion in the Bose Pro Portable PA Community


Note
Routing settings for USB from PC are also applied to USB A playback. See USB A Playback.

T1 ToneMatch Audio Engine

Please see: T1 ToneMatch® Audio Engine / USB


Retrieved from "https://toonz.ca/bose/wiki/index.php?title=Template:ToneMatch_Mixer_Backing_Tracks&oldid=21220"