Difference between revisions of "Kemper Profiler Recovery Options"
(Created page with "[https://www.soundside.de/support/KPARecovery.htm KPA Recovery Options] <html> <div class="mainPageTitle">KPA Recovery Hints</div> The KPA may not react or boot in some...") |
(No difference)
|
Latest revision as of 19:29, 8 November 2020
KPA Recovery Hints
The KPA may not react or boot in some rare cases. Here is a summary of my findings to get him back to life.
KPA does not react anymore
If the above did not help:
|
KPA does not start anymore
There are different reasons why the KPA may not start anymore.
The most common thing is a corrupt rig e.g. after downloading a corrupt file To reset the last used (corrupt) rig do like this:
If the above did not help: There are other keys to reset other parts of the KPA memory. To reset the (corrupt) Midi settings do like this:
(Note: All your system settings will be erased - but not your rigs)
Check the sections below to recover from this. |
Install or reinstall the firmware
|
Erase the internal flash memory
Note: Section removed
There is no need for this anymore - it was only for older firmware versions. If you think you should do it - please contact Kemper support. |
Check the KPA hardware
Note: Make a backup of your rigs before you do all this.
|