Difference between revisions of "L1 Pro32 Separating the Sections of the Mid-High Array"
(Created page with ";Question: How do I separate the sections of the cylindrical radiator? ;Answer: # Wear rubberized work gloves so you can get a good grip on the sections. # Firmly grasp the...") |
m |
||
Line 3: | Line 3: | ||
;Answer: | ;Answer: | ||
# Wear rubberized work gloves so you can get a good grip on the sections. | # Wear rubberized work gloves so you can get a good grip on the sections. | ||
− | # Firmly grasp the sections about 12" above and | + | # Firmly grasp the sections about 12" above and 3" below the break. |
# Gently rock the top section front to back about 1/4 inch. Don't rock side to side. | # Gently rock the top section front to back about 1/4 inch. Don't rock side to side. | ||
# While rocking, gently ease the top section away from the bottom. | # While rocking, gently ease the top section away from the bottom. |
Revision as of 22:49, 1 May 2021
- Question
- How do I separate the sections of the cylindrical radiator?
- Answer
- Wear rubberized work gloves so you can get a good grip on the sections.
- Firmly grasp the sections about 12" above and 3" below the break.
- Gently rock the top section front to back about 1/4 inch. Don't rock side to side.
- While rocking, gently ease the top section away from the bottom.