Difference between revisions of "Sony C48 Microphone"
m |
m (→References) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[Image:Sony C48 Front.jpg|right]] | [[Image:Sony C48 Front.jpg|right]] | ||
| − | + | <html><table><tr> | |
| + | <td valign="top" width="250"></html>__TOC__<html></td> | ||
| + | <td valign="top"><iframe width="560" height="315" src="https://www.youtube.com/embed/59iraUHEzok" frameborder="0" allowfullscreen></iframe> | ||
| + | </td> | ||
| + | </tr></table> </html> | ||
== General == | == General == | ||
The Sony C 48 is a large diaphragm, multi-pattern condenser microphone designed for vocal and general instrument recording and sound reinforcement. The C 48 features 3 selectable polar-patterns. Cardioid, omni-directional and bi-directional (figure eight) patterns provide the flexibility needed for any recording application. The C 48 is powered via +48 volt phantom or 9 Volt DC alkaline battery. The capsule is securely housed in a vibration proof enclosure eliminating noise caused by handling. A 10dB Pad switch improves Sound Pressure Level handling. A 2 position low-frequency roll-off switch reduces hum and noise registered at lower frequencies. | The Sony C 48 is a large diaphragm, multi-pattern condenser microphone designed for vocal and general instrument recording and sound reinforcement. The C 48 features 3 selectable polar-patterns. Cardioid, omni-directional and bi-directional (figure eight) patterns provide the flexibility needed for any recording application. The C 48 is powered via +48 volt phantom or 9 Volt DC alkaline battery. The capsule is securely housed in a vibration proof enclosure eliminating noise caused by handling. A 10dB Pad switch improves Sound Pressure Level handling. A 2 position low-frequency roll-off switch reduces hum and noise registered at lower frequencies. | ||
| Line 75: | Line 79: | ||
http://www.gigasonic.com/sony-c48.html | http://www.gigasonic.com/sony-c48.html | ||
| − | + | [https://www.gearslutz.com/board/geekslutz-forum/754803-sony-c-condenser-microphones.html GearSlutz] | |
[[Media:C-48.zip|Documents]] | [[Media:C-48.zip|Documents]] | ||
Latest revision as of 18:35, 21 July 2021
Contents |
General
The Sony C 48 is a large diaphragm, multi-pattern condenser microphone designed for vocal and general instrument recording and sound reinforcement. The C 48 features 3 selectable polar-patterns. Cardioid, omni-directional and bi-directional (figure eight) patterns provide the flexibility needed for any recording application. The C 48 is powered via +48 volt phantom or 9 Volt DC alkaline battery. The capsule is securely housed in a vibration proof enclosure eliminating noise caused by handling. A 10dB Pad switch improves Sound Pressure Level handling. A 2 position low-frequency roll-off switch reduces hum and noise registered at lower frequencies.
Features
Vibration-proof structure to eliminate noise transmitted through cable or stand
Selectable directivity-uni-directional, omni-directional or bi-directional
2-way powering-internal battery (50 hours of continuous operation) or external power supply
Suitable for vocal and instrumental recording
l0dB attenuation switch
2 position low cut switch
Specifications
Capsule type: Condenser
Frequency response: 30 -16,000
Directivity: Uni/Omni/Bi-directional
Sensitivity (dB) (0dB=1V/1 Pa at 1kHz): -41.0 ± 2.0 (Uni)
Dynamic range (dB): 106
Low-Cut: Music ,Voice
Power supply
Battery: 9V
Ext. power: DC 48V
Microphone Connector: XLR-3-12C type
Battery Life: 50H
Stand screw/Mic Holder screw: PF 1/2 inch thread
Output impedance at 1kHz (balanced) (1/2 ± 20%): 150
Induction noise from ext. magnetic field (0dB=20µ)P: 0
Effective output level at 1kHz (dBm) (0dBm=1mW/1P): -38.8(Uni)
Signal-to-noise ratio (A weighted,1kHz,1Pa): 72 dB(Uni)
Inherent noise (0dB=20µPa.): equal to or less than 22 dB SPL
Wind noise (0dB=20µPa.): 47(dB SPL)
Max. input sound pressure level (0dB=20µP): 128(dB SPL)
Mic attenuator: -10(dB)
Current drain (approx.): less than or equal to 1(mA)
Supplied Stand Adapter: NS 5/8 inch thread, W 3/8 inch thread
