Difference between revisions of "Template:Sub Comparison"
m |
m |
||
| Line 146: | Line 146: | ||
The power difference is negligible (960 watts RMS compared to 1000 watts RMS). | The power difference is negligible (960 watts RMS compared to 1000 watts RMS). | ||
| − | Two Sub1s tightly coupled (stacked or side-by-side) should provide up to +6 dB<ref> +3 dB from doubling the power and +3 dB from [https://blogs.qsc.com/live-sound/what-does-subwoofers-mutual-coupling-mean/ mutual coupling]. </ref> over a single Sub1 (118 + 6 = 124). The Sub 2 is 123 dB SPL. The difference is negligible | + | Two Sub1s tightly coupled (stacked or side-by-side) should provide up to +6 dB<ref> +3 dB from doubling the power and +3 dB from [https://blogs.qsc.com/live-sound/what-does-subwoofers-mutual-coupling-mean/ mutual coupling]. </ref> over a single Sub1 (118 + 6 = 124). The Sub 2 is 123 dB SPL. The difference is negligible. |
Revision as of 20:28, 16 August 2021
| Specification | B1 | B2 | Sub1 | Sub2 | F1 Subwoofer |
|---|---|---|---|---|---|
| dB SPL at 1 meter Continous/Peak |
n/a | 115 dB (continuous) 121 dB (peak) |
118 dB (continuous) 124 dB (peak) |
123 dB (continuous) 129 dB (peak) |
124 dB (continuous) 130 dB (peak) |
| Watts RMS Active/Passive |
125 Passive |
250 Passive |
480 Active |
1000 Active |
1000 Active |
| Weight pounds | 28 | 45 | 35.5 | 51.7 | 55 |
| Drivers | Two 5.25" | Two 10" | One 7"x13" RaceTrack | One 10"x18" RaceTrack | Two 10" |
| Cardioid Mode | n/a | n/a | Yes | Yes | n/a |
| Compatibility with Bose Products | L1 Legacy | L1 Legacy | L1 Pro, L1 Legacy, S1 Pro, L1 Compact | L1 Pro, L1 Legacy, S1 Pro, L1 Compact | L1 Pro, L1 Legacy, S1 Pro, L1 Compact |
| Compatibility with non-Bose products | No passive, no low-pass filter |
No passive, no low-pass filter |
Yes active, switchable low-pass filter |
Yes active, switchable low-pass filter |
Yes active, switchable high-pass filter |
- Two Sub1s or Sub2
Two Sub1s have approximately the same membrane surface area (180 square inches).
The power difference is negligible (960 watts RMS compared to 1000 watts RMS).
Two Sub1s tightly coupled (stacked or side-by-side) should provide up to +6 dB[1] over a single Sub1 (118 + 6 = 124). The Sub 2 is 123 dB SPL. The difference is negligible.
The Sub1 goes down to 40 Hz. The Sub2 goes down to 37 Hz (-3 dB). The difference is due to the larger physical volume of the Sub2 enclosure. Running two Sub1s does not change the frequency response.
- ↑ +3 dB from doubling the power and +3 dB from mutual coupling.