Difference between revisions of "Template:T8S to L1 Pro"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
(Created page with "<noinclude></noinclude> There is a single ToneMatch port on the {{T8S}}. You can use this * To connect to an {{L1P}} ToneMatch Port using a ToneMatch Cable File:ToneMat...")
 
m
Line 4: Line 4:
 
** Note: This is the mixer LEFT output
 
** Note: This is the mixer LEFT output
 
All of the Analog outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) still function while using the ToneMatch Port.
 
All of the Analog outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) still function while using the ToneMatch Port.
 +
 +
[[File:T8S ToneMatch Port to L1 Pro32.jpg]]
  
 
To run stereo, connect the second powered loudspeaker to one of the {{T8S}} RIGHT Outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve).
 
To run stereo, connect the second powered loudspeaker to one of the {{T8S}} RIGHT Outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve).
  
<br>OR
+
 
 +
 
 +
;Alternat connection
 
* ToneMatch port on the {{T8S}} to [[ToneMatch Power Supply]] for power and use the Analog Outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) to the L1 Pro or other powered loudspeaker
 
* ToneMatch port on the {{T8S}} to [[ToneMatch Power Supply]] for power and use the Analog Outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) to the L1 Pro or other powered loudspeaker
  

Revision as of 17:40, 16 January 2022

There is a single ToneMatch port on the T8S ToneMatch mixer. You can use this

  • To connect to an L1 Pro[1] ToneMatch Port using a ToneMatch Cable
    ToneMatch cable
    or Network Cable
    Network cable
    • Note: This is the mixer LEFT output

All of the Analog outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) still function while using the ToneMatch Port.

T8S ToneMatch Port to L1 Pro32.jpg

To run stereo, connect the second powered loudspeaker to one of the T8S ToneMatch mixer RIGHT Outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve).


Alternat connection



  1. L1 Pro 8, L1 Pro 16, L1 Pro 32