Difference between revisions of "Template:Sub Comparison"
m |
m |
||
| Line 158: | Line 158: | ||
* [https://assets.bose.com/content/dam/Bose_DAM/Web/pro/global/products/portable_PA/sub2_bass_module/downloads/technical_information/tds_sub2_en.pdf Sub2 Technical Data Sheet] | * [https://assets.bose.com/content/dam/Bose_DAM/Web/pro/global/products/portable_PA/sub2_bass_module/downloads/technical_information/tds_sub2_en.pdf Sub2 Technical Data Sheet] | ||
* [https://pro.bose.com/content/dam/Bose_DAM/Web/pro/global/products/portable_PA/F1_Subwoofer/Downloads/Technical_data_sheet/tds_f1_subwoofer.pdf F1 Subwoofer Technical Data] | * [https://pro.bose.com/content/dam/Bose_DAM/Web/pro/global/products/portable_PA/F1_Subwoofer/Downloads/Technical_data_sheet/tds_f1_subwoofer.pdf F1 Subwoofer Technical Data] | ||
| − | --- | + | ---- |
Revision as of 03:10, 26 January 2022
| Specification | B1 | B2 | Sub1 | Sub2 | F1 Subwoofer |
|---|---|---|---|---|---|
| dB SPL at 1 meter Continous/Peak |
n/a | 115 dB (continuous) 121 dB (peak) |
118 dB (continuous) 124 dB (peak) |
123 dB (continuous) 129 dB (peak) |
124 dB (continuous) 130 dB (peak) |
| Watts RMS Active/Passive |
125 Passive |
250 Passive |
480 Active |
1000 Active |
1000 Active |
| Weight pounds | 28 | 45 | 35.5 | 51.7 | 55 |
| Drivers | Two 5.25" | Two 10" | One 7"x13" RaceTrack | One 10"x18" RaceTrack | Two 10" |
| Cardioid Mode | n/a | n/a | Yes | Yes | n/a |
| Compatibility with Bose Products | L1 Legacy | L1 Legacy | L1 Pro, L1 Legacy, S1 Pro, L1 Compact | L1 Pro, L1 Legacy, S1 Pro, L1 Compact | L1 Pro, L1 Legacy, S1 Pro, L1 Compact |
| Compatibility with non-Bose products | No passive, no low-pass filter |
No passive, no low-pass filter |
Yes active, switchable low-pass filter |
Yes active, switchable low-pass filter |
Yes active, switchable high-pass filter |
- Two Sub1s or Sub2
Two Sub1s have approximately the same membrane surface area as the Sub2, (180 square inches).
The power difference is negligible (960 watts RMS compared to 1000 watts RMS).
Two Sub1s tightly coupled (stacked or side-by-side) should provide up to +6 dB[1] over a single Sub1 (118 + 6 = 124). The Sub 2 is 123 dB SPL. The difference is negligible.
The Sub1 goes down to 40 Hz. The Sub2 goes down to 37 Hz (-3 dB). The difference is due to the larger physical volume of the Sub2 enclosure. Running two Sub1s does not change the frequency response.
- Technical Data for standalone units
- ↑ +3 dB from doubling the power and +3 dB from mutual coupling.