Difference between revisions of "Template:Sub Comparison"
m |
m |
||
| (26 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | {{Sub icon}}{{B1 icon}}{{B2 icon}}{{F1 icon}} | ||
<html> | <html> | ||
<style> | <style> | ||
| Line 46: | Line 47: | ||
<table id="comparison" class="greyGridTable"> | <table id="comparison" class="greyGridTable"> | ||
<tr> | <tr> | ||
| − | <th>Specification</th><th>B1</th><th>B2</th><th>Sub1</th><th>Sub2</th><th>F1 Subwoofer</th> | + | <th>Specification</th><th>B1</th><th>B2</th><th>L1 Pro8<br>Power Stand only</th><th>L1 Pro16<br>Power Stand only</th><th>Sub1</th><th>Sub2</th><th>F1 Subwoofer</th> |
</tr> | </tr> | ||
<tr> | <tr> | ||
| − | <td>dB SPL at 1 meter<br> | + | <td>dB SPL at 1 meter<br>Continuous/Peak</td> |
| − | <td> | + | <td>109 dB <br>(estimated, not published)</td> |
| − | <td> | + | <td>112 dB <br>(estimated on total system SPL of L1 Model 1S with B2)</td> |
| − | <td>118 dB ( | + | <td>112 dB (cont)<br>118 dB (peak)<br>(values estimated on total system SPL)</td> |
| − | <td>123 dB ( | + | <td>118 dB (cont)<br>121 dB (peak)<br>(values estimated on total system SPL)</td> |
| − | <td>124 dB ( | + | <td>118 dB (cont)<br>124 dB (peak)</td> |
| + | <td>123 dB (cont)<br>129 dB (peak)</td> | ||
| + | <td>124 dB (cont)<br>130 dB (peak)</td> | ||
</tr> | </tr> | ||
| Line 61: | Line 64: | ||
<td>125<br>Passive</td> | <td>125<br>Passive</td> | ||
<td>250<br>Passive</td> | <td>250<br>Passive</td> | ||
| + | <td>240<br>Active</td> | ||
| + | <td>1000<br>Active</td> | ||
<td>480<br>Active</td> | <td>480<br>Active</td> | ||
<td>1000<br>Active</td> | <td>1000<br>Active</td> | ||
| Line 70: | Line 75: | ||
<td>28 </td> | <td>28 </td> | ||
<td>45 </td> | <td>45 </td> | ||
| − | <td> | + | <td>30.9</td> |
| + | <td>41.4</td> | ||
| + | <td>34.1 </td> | ||
<td>51.7</td> | <td>51.7</td> | ||
<td>55</td> | <td>55</td> | ||
| Line 79: | Line 86: | ||
<td>Two 5.25"</td> | <td>Two 5.25"</td> | ||
<td>Two 10"</td> | <td>Two 10"</td> | ||
| + | <td>One 7"x13" RaceTrack</td> | ||
| + | <td>One 10"x18" RaceTrack</td> | ||
<td>One 7"x13" RaceTrack</td> | <td>One 7"x13" RaceTrack</td> | ||
<td>One 10"x18" RaceTrack</td> | <td>One 10"x18" RaceTrack</td> | ||
| Line 86: | Line 95: | ||
<tr> | <tr> | ||
<td>Cardioid Mode</td> | <td>Cardioid Mode</td> | ||
| + | <td>n/a</td> | ||
| + | <td>n/a</td> | ||
<td>n/a</td> | <td>n/a</td> | ||
<td>n/a</td> | <td>n/a</td> | ||
| Line 98: | Line 109: | ||
<td>L1 Legacy</td> | <td>L1 Legacy</td> | ||
<td>L1 Legacy</td> | <td>L1 Legacy</td> | ||
| + | <td>n/a<br>not intended to be used separately</td> | ||
| + | <td>n/a<br>not intended to be used separately</td> | ||
<td>L1 Pro, L1 Legacy, S1 Pro, L1 Compact</td> | <td>L1 Pro, L1 Legacy, S1 Pro, L1 Compact</td> | ||
<td>L1 Pro, L1 Legacy, S1 Pro, L1 Compact</td> | <td>L1 Pro, L1 Legacy, S1 Pro, L1 Compact</td> | ||
| Line 107: | Line 120: | ||
<td>No<br>passive, no low-pass filter</td> | <td>No<br>passive, no low-pass filter</td> | ||
<td>No<br>passive, no low-pass filter</td> | <td>No<br>passive, no low-pass filter</td> | ||
| + | <td>n/a<br>not intended to be used separately</td> | ||
| + | <td>n/a<br>not intended to be used separately</td> | ||
<td>Yes<br>active, switchable low-pass filter</td> | <td>Yes<br>active, switchable low-pass filter</td> | ||
<td>Yes<br>active, switchable low-pass filter</td> | <td>Yes<br>active, switchable low-pass filter</td> | ||
| Line 114: | Line 129: | ||
<tr> | <tr> | ||
| + | <td></td> | ||
| + | <td></td> | ||
<td></td> | <td></td> | ||
<td></td> | <td></td> | ||
| Line 123: | Line 140: | ||
<tr> | <tr> | ||
| + | <td></td> | ||
| + | <td></td> | ||
<td></td> | <td></td> | ||
<td></td> | <td></td> | ||
| Line 132: | Line 151: | ||
<tr> | <tr> | ||
| + | <td></td> | ||
| + | <td></td> | ||
<td></td> | <td></td> | ||
<td></td> | <td></td> | ||
| Line 140: | Line 161: | ||
</tr> | </tr> | ||
</table> | </table> | ||
| + | |||
| + | ; This data is compiled from Bose Technical Data Sheets and discussions with the Bose L1 Product Managers for the unpublished data. | ||
; Two Sub1s or Sub2 | ; Two Sub1s or Sub2 | ||
| − | Two Sub1s have approximately the same membrane surface area (180 square inches). | + | Two Sub1s have approximately the same membrane surface area as the Sub2, (180 square inches). |
The power difference is negligible (960 watts RMS compared to 1000 watts RMS). | The power difference is negligible (960 watts RMS compared to 1000 watts RMS). | ||
| − | Two Sub1s tightly coupled (stacked or side-by-side) should provide up to +6 dB over a single Sub1 (118 + 6 = 124). The Sub 2 is 123 dB SPL. The | + | Two Sub1s tightly coupled (stacked or side-by-side) should provide up to +6 dB SPL<ref> +3 dB from doubling the power and +3 dB from [https://blogs.qsc.com/live-sound/what-does-subwoofers-mutual-coupling-mean/ mutual coupling]. </ref> over a single Sub1 (118 + 6 = 124). The Sub 2 is 123 dB SPL. The SPL performance of two Sub1s should be similar to a single Sub2. |
The Sub1 goes down to 40 Hz. The Sub2 goes down to 37 Hz (-3 dB). The difference is due to the larger physical volume of the Sub2 enclosure. Running two Sub1s does not change the frequency response. | The Sub1 goes down to 40 Hz. The Sub2 goes down to 37 Hz (-3 dB). The difference is due to the larger physical volume of the Sub2 enclosure. Running two Sub1s does not change the frequency response. | ||
| + | ; L1 Pro16 | ||
| + | The SPL output of the L1 Pro16 is 118 db SPL (124 peak). The output is similar to the Sub1. | ||
| + | |||
| + | ; Technical Data for standalone units | ||
| + | {{L1 Pro Technical Data Sheets}} | ||
| + | ---- | ||
Latest revision as of 21:12, 22 October 2023
| Specification | B1 | B2 | L1 Pro8 Power Stand only | L1 Pro16 Power Stand only | Sub1 | Sub2 | F1 Subwoofer |
|---|---|---|---|---|---|---|---|
| dB SPL at 1 meter Continuous/Peak |
109 dB (estimated, not published) |
112 dB (estimated on total system SPL of L1 Model 1S with B2) |
112 dB (cont) 118 dB (peak) (values estimated on total system SPL) |
118 dB (cont) 121 dB (peak) (values estimated on total system SPL) |
118 dB (cont) 124 dB (peak) |
123 dB (cont) 129 dB (peak) |
124 dB (cont) 130 dB (peak) |
| Watts RMS Active/Passive |
125 Passive |
250 Passive |
240 Active |
1000 Active |
480 Active |
1000 Active |
1000 Active |
| Weight pounds | 28 | 45 | 30.9 | 41.4 | 34.1 | 51.7 | 55 |
| Drivers | Two 5.25" | Two 10" | One 7"x13" RaceTrack | One 10"x18" RaceTrack | One 7"x13" RaceTrack | One 10"x18" RaceTrack | Two 10" |
| Cardioid Mode | n/a | n/a | n/a | n/a | Yes | Yes | n/a |
| Compatibility with Bose Products | L1 Legacy | L1 Legacy | n/a not intended to be used separately |
n/a not intended to be used separately |
L1 Pro, L1 Legacy, S1 Pro, L1 Compact | L1 Pro, L1 Legacy, S1 Pro, L1 Compact | L1 Pro, L1 Legacy, S1 Pro, L1 Compact |
| Compatibility with non-Bose products | No passive, no low-pass filter |
No passive, no low-pass filter |
n/a not intended to be used separately |
n/a not intended to be used separately |
Yes active, switchable low-pass filter |
Yes active, switchable low-pass filter |
Yes active, switchable high-pass filter |
- This data is compiled from Bose Technical Data Sheets and discussions with the Bose L1 Product Managers for the unpublished data.
- Two Sub1s or Sub2
Two Sub1s have approximately the same membrane surface area as the Sub2, (180 square inches).
The power difference is negligible (960 watts RMS compared to 1000 watts RMS).
Two Sub1s tightly coupled (stacked or side-by-side) should provide up to +6 dB SPL[1] over a single Sub1 (118 + 6 = 124). The Sub 2 is 123 dB SPL. The SPL performance of two Sub1s should be similar to a single Sub2.
The Sub1 goes down to 40 Hz. The Sub2 goes down to 37 Hz (-3 dB). The difference is due to the larger physical volume of the Sub2 enclosure. Running two Sub1s does not change the frequency response.
- L1 Pro16
The SPL output of the L1 Pro16 is 118 db SPL (124 peak). The output is similar to the Sub1.
- Technical Data for standalone units
- L1 Pro8 Technical Data Sheet
- L1 Pro16 Technical Data Sheet
- L1 Pro32 Technical Data Sheet
- Sub1 Technical Data Sheet
- Sub2 Technical Data Sheet
- ↑ +3 dB from doubling the power and +3 dB from mutual coupling.