Difference between revisions of "ToneMatch Mixer without L1"
m |
m |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | {{Bose Reviewed}} {{T1 icon}}{{T4S icon}}{{T8S icon}}<br> | ||
<!-- A note from Ken-at-Bose | <!-- A note from Ken-at-Bose | ||
On the subject of whether the {{T1}} can be used without the L1, I would like to comment on one particular aspect. | On the subject of whether the {{T1}} can be used without the L1, I would like to comment on one particular aspect. | ||
--> | --> | ||
| − | '''Should you or should you not use a ToneMatch preset when using the {{T1}} with other systems?''' | + | '''Should you or should you not use a ToneMatch preset when using the {{ToneMatch Mixer}} or {{T1}} with other systems?''' |
{{ToneMatch}} presets optimize the sound of a microphone or instrument when used with an {{L1}} system. So this might lead you to conclude that a ToneMatch preset shouldn't be used with other systems. | {{ToneMatch}} presets optimize the sound of a microphone or instrument when used with an {{L1}} system. So this might lead you to conclude that a ToneMatch preset shouldn't be used with other systems. | ||
| Line 11: | Line 12: | ||
If that other system had a similar "voicing" or tonal response as the L1 then you would expect the {{ToneMatch}} preset to be of value with that other system. | If that other system had a similar "voicing" or tonal response as the L1 then you would expect the {{ToneMatch}} preset to be of value with that other system. | ||
| − | There | + | There is potentially a class of systems that fit this description. The {{L1}} system is voiced to make high quality commercial recordings sound the best we know how. Some studio systems are voiced the same way, as they are where those recordings were mixed. |
Thus, on some studio systems, you should expect {{ToneMatch}} presets to be of value. | Thus, on some studio systems, you should expect {{ToneMatch}} presets to be of value. | ||
| Line 26: | Line 27: | ||
MikeZ Comment to which Ken refers above. | MikeZ Comment to which Ken refers above. | ||
| − | The whole thing with using the {{T1}} with other systems is that we don't really know how | + | The whole thing with using the {{ToneMatch Mixer}} or {{T1}} with other systems is that we don't really know how it's going to sound since all big house systems are different. Generally, folks have reported the presets work well - so I think you will be fine with them. If the presets are not working, you can always go Flat using the Acoustic Guitar zEQ for adjustments (last preset in the Acoustic Guitar bank). And you'll still have all of the effects and tools in the T1 at your disposal. |
Source: [http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/7371070725?r=2541001725#2541001725 Using the T1® without the L1®] on the {{Forum}} | Source: [http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/7371070725?r=2541001725#2541001725 Using the T1® without the L1®] on the {{Forum}} | ||
Latest revision as of 10:08, 10 December 2023
Should you or should you not use a ToneMatch preset when using the ToneMatch Mixer[1] or T1 ToneMatch Audio Engine with other systems?
ToneMatch® presets optimize the sound of a microphone or instrument when used with an L1 system. So this might lead you to conclude that a ToneMatch preset shouldn't be used with other systems.
But that wouldn't be quite right.
If that other system had a similar "voicing" or tonal response as the L1 then you would expect the ToneMatch® preset to be of value with that other system.
There is potentially a class of systems that fit this description. The L1 system is voiced to make high quality commercial recordings sound the best we know how. Some studio systems are voiced the same way, as they are where those recordings were mixed.
Thus, on some studio systems, you should expect ToneMatch® presets to be of value.
Other systems, including PA speakers and monitor speakers are voiced in an almost random and widely varying way, in our experience. Thus, as MikeZ points out, it's impossible to say whether a ToneMatch® preset will help or hurt.
With best regards,
Ken
Source: Using the T1® without the L1® on the Bose® Pro Portable PA Community
MikeZ Comment to which Ken refers above.
The whole thing with using the ToneMatch Mixer[1] or T1 ToneMatch Audio Engine with other systems is that we don't really know how it's going to sound since all big house systems are different. Generally, folks have reported the presets work well - so I think you will be fine with them. If the presets are not working, you can always go Flat using the Acoustic Guitar zEQ for adjustments (last preset in the Acoustic Guitar bank). And you'll still have all of the effects and tools in the T1 at your disposal.
Source: Using the T1® without the L1® on the Bose® Pro Portable PA Community
T1 ToneMatch Audio Engine Power Supply Required
This is the power supply for the ToneMatch mixers (T1 ToneMatch Audio Engine and T4S/T8S ToneMatch® Mixers).
The T8S ships with a ToneMatch power supply because the T8S cannot draw power from an L1 Model 1S or L1 Model II Power Stand.
You will need the ToneMatch power supply to power your T1 or T4S mixer when running with an L1 Classic, L1 Model I, L1 Compact, S1 Pro System or non-Bose equipment. You will need a one of these if you have two ToneMatch mixers running into a single L1® Model II or L1® Model 1S. — details below the picture.
If you connect your T1 ToneMatch Audio Engine or T4S mixer to a L1 Model II or L1 Model 1S then the T1 ToneMatch® Audio Engine or T4S draws its power through the ToneMatch cable.
If you connect your ToneMatch mixer to an an L1 Classic, L1 Model I, L1 Compact or S1 Pro System or non-Bose equipment then you will need the ToneMatch power supply
If you are attaching two ToneMatch mixers to a single L1® Model II or L1 Model 1S then you will need this power supply to support the second ToneMatch mixer - the one connected to the Power Stand Analog Input.
See: Connecting Two T1®s to a Model II for details.