Difference between revisions of "Mixer to Share Presets on L1 Pro"
m |
m |
||
(3 intermediate revisions by the same user not shown) | |||
Line 12: | Line 12: | ||
=== Assumptions === | === Assumptions === | ||
* You have more than two inputs requiring Presets. | * You have more than two inputs requiring Presets. | ||
− | * Two or more of those inputs are similar, for example | + | * Two or more of those inputs are similar, for example microphones that are of the same make and model. |
* You have a stereo mixer or one that has two distinct busses. | * You have a stereo mixer or one that has two distinct busses. | ||
Line 18: | Line 18: | ||
For the following discussion, a "side" of the mixer is either Left or Right, or it could be a "buss" or "alt" channel routing. | For the following discussion, a "side" of the mixer is either Left or Right, or it could be a "buss" or "alt" channel routing. | ||
* Pool all microphone inputs to one side of the mixer (e.g. LEFT). | * Pool all microphone inputs to one side of the mixer (e.g. LEFT). | ||
− | ** Take the pooled output (LEFT output the mixer) to L1 Pro channel 1 with ToneMatch switch set to | + | ** Take the pooled output (LEFT output the mixer) to L1 Pro channel 1 with ToneMatch switch set to MIC. |
* Pool all other inputs to the other side of the mixer (e.g. RIGHT) | * Pool all other inputs to the other side of the mixer (e.g. RIGHT) | ||
− | If these inputs are not | + | If these inputs are not instruments for which there are ToneMatch Presets (in the Bose App), run the mixer RIGHT output to L1 Pro channel 2 with the ToneMatch switch set to Off. |
− | * Take the pooled output (the other side of the mixer) to L1 Pro channel 2 and use a Preset that is appropriate for the input ( | + | * Take the pooled output (the other side of the mixer) to L1 Pro channel 2 and use a Preset that is appropriate for the input (MIC INST OFF). |
** Take the pooled output (RIGHT output on the mixer) to L1 Pro channel 2 | ** Take the pooled output (RIGHT output on the mixer) to L1 Pro channel 2 | ||
** If the inputs are acoustic guitars with pickups set the ToneMatch switch to INST and use the Bose App to change the ToneMatch Preset | ** If the inputs are acoustic guitars with pickups set the ToneMatch switch to INST and use the Bose App to change the ToneMatch Preset | ||
Line 30: | Line 30: | ||
=== Example === | === Example === | ||
==== 2 Vocals, 2 Guitars ==== | ==== 2 Vocals, 2 Guitars ==== | ||
− | * You have two vocal microphones. Route these through the mixer to L1 Pro channel 1 with ToneMatch switch to | + | * You have two vocal microphones. Route these through the mixer to L1 Pro channel 1 with ToneMatch switch to MIC. |
− | * You have two similar Acoustic Guitars with pickups. Route these through the mixer to L1 Pro channel 2 with ToneMatch switch to | + | * You have two similar Acoustic Guitars with pickups. Route these through the mixer to L1 Pro channel 2 with ToneMatch switch to INST. |
− | [[File:MixerToSharePresetsL1Pro | + | [[File:MixerToSharePresetsL1Pro.jpg]] |
===== Connections ===== | ===== Connections ===== | ||
− | [[File: | + | [[File:L1 Pro Chan 12 Mic Inst.jpg]] |
====== Microphones ====== | ====== Microphones ====== | ||
# Run both microphones to the mixer. | # Run both microphones to the mixer. | ||
Line 61: | Line 61: | ||
# On the input strips for the Instruments pan all the way to the RIGHT | # On the input strips for the Instruments pan all the way to the RIGHT | ||
# Run the Mixer RIGHT output to the Power Stand Channel 2 | # Run the Mixer RIGHT output to the Power Stand Channel 2 | ||
− | # Set the | + | # Set the L1 Pro channel 2 ToneMatch Switch to Off |
Latest revision as of 12:21, 14 August 2024
This article is about using a Mixer to allow more than one input per L1 Pro channel to use ToneMatch® Presets. |
Assumptions
- You have more than two inputs requiring Presets.
- Two or more of those inputs are similar, for example microphones that are of the same make and model.
- You have a stereo mixer or one that has two distinct busses.
General Principles
For the following discussion, a "side" of the mixer is either Left or Right, or it could be a "buss" or "alt" channel routing.
- Pool all microphone inputs to one side of the mixer (e.g. LEFT).
- Take the pooled output (LEFT output the mixer) to L1 Pro channel 1 with ToneMatch switch set to MIC.
- Pool all other inputs to the other side of the mixer (e.g. RIGHT)
If these inputs are not instruments for which there are ToneMatch Presets (in the Bose App), run the mixer RIGHT output to L1 Pro channel 2 with the ToneMatch switch set to Off.
- Take the pooled output (the other side of the mixer) to L1 Pro channel 2 and use a Preset that is appropriate for the input (MIC INST OFF).
- Take the pooled output (RIGHT output on the mixer) to L1 Pro channel 2
- If the inputs are acoustic guitars with pickups set the ToneMatch switch to INST and use the Bose App to change the ToneMatch Preset
- If the inputs are NOT acoustic guitars with pickups set the ToneMatch switch to Off or set to the switch to INST and use the Bose App to change the ToneMatch Preset
Example
2 Vocals, 2 Guitars
- You have two vocal microphones. Route these through the mixer to L1 Pro channel 1 with ToneMatch switch to MIC.
- You have two similar Acoustic Guitars with pickups. Route these through the mixer to L1 Pro channel 2 with ToneMatch switch to INST.
Connections
Microphones
- Run both microphones to the mixer.
- On the input strips for the microphones pan all the way to the LEFT
- Run the Mixer LEFT output to the L1 Pro channel 1
- Set the S1 Pro channel 1 ToneMatch Switch to Microphone
Guitars
- Run both Guitars to the mixer.
- On the input strips for the Guitars pan all the way to the RIGHT
- Run the Mixer RIGHT output to the L1 Pro channel 2
- Set the S1 Pro channel 2 ToneMatch Switch to Guitar
2 Vocals, 2 Instruments
Microphones
- Run both microphones to the mixer.
- On the input strips for the microphones pan all the way to the LEFT
- Run the Mixer LEFT output to the L1 Pro channel 1
Instruments
- Run both Instruments to the mixer. I used a Keyboard and an Electric Bass as examples
- On the input strips for the Instruments pan all the way to the RIGHT
- Run the Mixer RIGHT output to the Power Stand Channel 2
- Set the L1 Pro channel 2 ToneMatch Switch to Off