Difference between revisions of "Template:T8S to S1 Pro+ Wireless"
m (ST moved page Template:T8S to S1 Pro+ to Template:T8S to S1 Pro+ Wireless) |
m |
||
| Line 1: | Line 1: | ||
| + | |||
;Q Can I use the S1 Pro+ transmitters with the T8S? | ;Q Can I use the S1 Pro+ transmitters with the T8S? | ||
;A Yes | ;A Yes | ||
| − | + | ===1/4 inch (6.3mm) Outputs ==== | |
The 1/4-inch Instrument transmitters work when connected to the T8S 1/4-inch outputs. | The 1/4-inch Instrument transmitters work when connected to the T8S 1/4-inch outputs. | ||
| − | + | ===XLR Outputs=== | |
The XLR mic/line transmitters won't fit directly into the T8S because a lip on the bottom edge of the back prevents them from seating correctly into the input connectors. However, if you use XLR cables between the transmitters and the T8S, everything works as expected. You would do this to elevate the transmitters to give you an unobstructed line-of-sight path from them to the S1 Pro+ systems. | The XLR mic/line transmitters won't fit directly into the T8S because a lip on the bottom edge of the back prevents them from seating correctly into the input connectors. However, if you use XLR cables between the transmitters and the T8S, everything works as expected. You would do this to elevate the transmitters to give you an unobstructed line-of-sight path from them to the S1 Pro+ systems. | ||
| + | |||
| + | For best results, set the S1 Pro+ systems to LINE input. Details below. | ||
| + | |||
| + | |||
| + | ==== Set Up ==== | ||
| + | # Turn down the volume on both S1 Pro+ systems | ||
| + | # On S1 Pro+ 2, pair the XLR transmitter to one of the Input channels (1 or 2). For this discussion, we'll assume you have connected to channel 1. On S1 Pro+ 2, on the input channel, set the Bass and Treble to 12:00 o'clock, and if using channels 1 or 2, set ToneMatch to Off, and Reverb all the way down.<br> | ||
| + | [[File:S1 Pro+ XLR MicLine Pair.jpg|600px]] | ||
| + | # Connect the XLR Wireless transmitter to S1 Pro+ 1 Line Out (XLR connection)<br> | ||
| + | [[File:S1 Pro+ Line Out.jpg|600px]] | ||
| + | # On S1 Pro+ 2 channel 1 set the input to LINE input<br> | ||
| + | [[File:S1 Pro+ Wireless LINE Input.jpg|600px]] | ||
---- | ---- | ||
Revision as of 20:19, 7 October 2024
- Q Can I use the S1 Pro+ transmitters with the T8S?
- A Yes
1/4 inch (6.3mm) Outputs =
The 1/4-inch Instrument transmitters work when connected to the T8S 1/4-inch outputs.
XLR Outputs
The XLR mic/line transmitters won't fit directly into the T8S because a lip on the bottom edge of the back prevents them from seating correctly into the input connectors. However, if you use XLR cables between the transmitters and the T8S, everything works as expected. You would do this to elevate the transmitters to give you an unobstructed line-of-sight path from them to the S1 Pro+ systems.
For best results, set the S1 Pro+ systems to LINE input. Details below.
Set Up
- Turn down the volume on both S1 Pro+ systems
- On S1 Pro+ 2, pair the XLR transmitter to one of the Input channels (1 or 2). For this discussion, we'll assume you have connected to channel 1. On S1 Pro+ 2, on the input channel, set the Bass and Treble to 12:00 o'clock, and if using channels 1 or 2, set ToneMatch to Off, and Reverb all the way down.
- Connect the XLR Wireless transmitter to S1 Pro+ 1 Line Out (XLR connection)
- On S1 Pro+ 2 channel 1 set the input to LINE input
