Difference between revisions of "Mixer / Numark / CDMix-2"
m (category:Numark) |
m (→¼ Inch with suitable output: ==>Now === RCA to ¼ Inch ===) |
||
| Line 21: | Line 21: | ||
| − | === ¼ Inch | + | === RCA to ¼ Inch === |
| − | + | The RCA outputs provide a signal at a level that is suitable for the ¼ inch phone jack inputs on Power Stand channels 1,2 3 or 4. | |
| + | |||
| + | To use these you will need an adapter or special cable to convert from RCA to ¼ inch phone jacks. | ||
| − | |||
Revision as of 20:35, 25 December 2007
Numark CDMix-2 Mixer
Summary
Simplest thing that could possibly work.
Use the ¼ inch phone jack outputs (documented as 'to powered monitors') not the XLR-to-XLR (PS1 Powerstand Channels 1 or 2). If you want to use XLR - use a Pad.
Outputs
XLR Balanced +4
The nominal output of the XLR Balanced Outputs is too high for the XLR inputs on the PS1 Power Stand Channels 1 and 2. If you want to use balanced cables from the Mixer to Channels 1/2 on the L1 Classic or L1 Model I you may need to use a Pad to lower the signal level from the mixer.
{{#Click:Pad|Image:Pad.jpg|Attenuation Pad}}
RCA to ¼ Inch
The RCA outputs provide a signal at a level that is suitable for the ¼ inch phone jack inputs on Power Stand channels 1,2 3 or 4.
To use these you will need an adapter or special cable to convert from RCA to ¼ inch phone jacks.
Links:
More Notes