Difference between revisions of "L1® Model II Power Stand Firmware Updates"
({{:Firmware Update Warning}}) |
m (L1™ Model II Power Stand Firmware Updates moved to L1® Model II Power Stand Firmware Updates: ® replaces ™) |
(No difference)
|
Revision as of 01:27, 11 February 2008
Firmware Prerequisites
|
Warning
After you update the T1 ToneMatch Audio Engine or L1 Model II firmware, if you see a window on the PC that says the update was not successful, you should:
- turn the L1 and T1 off
- wait three seconds
- then turn the L1 and T1 back on
Do this before trying the update again!
This allows the L1 and T1s to re-establish a good copy of the software.
Source: If your firmware update is not successful - Caution
Version 1.1
Download L1™ Power Stand Firmware v 1.1
Date: 2007/08/10
Recommended for: All L1™ Model II Owners
Announcement: New T1 and L1™ Firmware
Fixes
System Hang / Blue Screen on T1™
Fixes a bug where some power outages could cause the L1 model II to hang. This is related to the problems reported on the message board where some users have experienced a loss of audio sometimes accompanied by a blank blue T1 LCD screen.[1]
Enhancements
Fan Behavior
We've also made some changes to the fan behavior to make it less noticeable.
Related
It is highly recommended that you also download and apply T1 ToneMatch™ Audio Engine Firmware Updates Version 1.3
Prior Versions
- Version 1.0 - Original as released from manufacturing (no download)
- ↑ Message Board reports of T1™ failures