Difference between revisions of "EQ"
m (Redirecting to T1 ToneMatch® Audio Engine / zEQ) |
DanCornett (talk | contribs) m (formatting for better clarity) |
||
| (2 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | Equalization | |
| + | |||
| + | There are many kinds of EQ. Each has a different pattern of attenuation or boost. | ||
| + | |||
| + | A peaking equalizer raises or lowers a range of frequencies around a central point in a bell shape. A peaking equalizer with controls to adjust the level (Gain), bandwidth (Q) and center frequency (Hz) is called a '''parametric equalizer'''. If there is no control for the bandwidth (it is fixed by the designer) then it is called a quasi-parametric or semi-parametric equalizer. | ||
| + | |||
| + | A pass filter attenuates either high or low frequencies while allowing other frequencies to pass unfiltered. A '''high-pass''' filter modifies a signal only by taking out low frequencies; a '''low-pass''' filter only modifies the audio signal by taking out high frequencies. A pass filter is described by its cut-off point and slope. The cut-off point is the frequency where high or low-frequencies will be removed. The slope, given in decibels per octave, describes a ratio of how the filter attenuates frequencies past the cut-off point (eg. 12 dB per octave). | ||
| + | |||
| + | A '''band-pass''' filter is a combination (in series) of one high-pass filter and one low-pass filter which together allow only a band of frequencies to pass, attenuating both high and low frequencies past certain cut-off points. | ||
| + | |||
| + | Shelving-type equalizers increase or attenuate the level of a wide range of frequencies by a fixed amount. A low shelf will affect low frequencies up to a certain point and then above that point will have little effect. A high shelf affects the level of high frequencies, while below a certain point, the low frequencies are unaffected. | ||
| + | |||
| + | Source: [http://en.wikipedia.org/wiki/Equalization Equalization] — wikipedia | ||
| + | |||
| + | |||
| + | See also: | ||
| + | [[T1 ToneMatch® Audio Engine / zEQ]] | ||
Latest revision as of 13:53, 31 January 2011
Equalization
There are many kinds of EQ. Each has a different pattern of attenuation or boost.
A peaking equalizer raises or lowers a range of frequencies around a central point in a bell shape. A peaking equalizer with controls to adjust the level (Gain), bandwidth (Q) and center frequency (Hz) is called a parametric equalizer. If there is no control for the bandwidth (it is fixed by the designer) then it is called a quasi-parametric or semi-parametric equalizer.
A pass filter attenuates either high or low frequencies while allowing other frequencies to pass unfiltered. A high-pass filter modifies a signal only by taking out low frequencies; a low-pass filter only modifies the audio signal by taking out high frequencies. A pass filter is described by its cut-off point and slope. The cut-off point is the frequency where high or low-frequencies will be removed. The slope, given in decibels per octave, describes a ratio of how the filter attenuates frequencies past the cut-off point (eg. 12 dB per octave).
A band-pass filter is a combination (in series) of one high-pass filter and one low-pass filter which together allow only a band of frequencies to pass, attenuating both high and low frequencies past certain cut-off points.
Shelving-type equalizers increase or attenuate the level of a wide range of frequencies by a fixed amount. A low shelf will affect low frequencies up to a certain point and then above that point will have little effect. A high shelf affects the level of high frequencies, while below a certain point, the low frequencies are unaffected.
Source: Equalization — wikipedia
See also:
T1 ToneMatch® Audio Engine / zEQ