Difference between revisions of "Template:L1 Compact with Sub1 or Sub2"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m
m
 
(6 intermediate revisions by the same user not shown)
Line 3: Line 3:
  
 
For best results, the signal flow should go from   
 
For best results, the signal flow should go from   
 +
<table>
 +
<th>First L1 Compact</th><th>Second L1 Compact (if you have two)</th></tr>
 +
<tr><td>
 +
# [[File:Sub1 Sub2 io panel to L1 Compact.jpg|thumb|Sub io panel]]The signal source (e.g., {{ToneMatch Mixer}}, mixer, DJ console) output to
 +
# The Sub1 or Sub2 subwoofer LINE IN 1
 +
# The Sub1 or Sub2 subwoofer LINE OUT 1 to
 +
# [[File:Compact_Channel_2_Line_Level.png|thumb|Compact Channel 2]]The {{Compact}}
 +
#* Connect to L1 Compact Channel 2
 +
#* Set the ToneMatch switch to Line Level (down position)
 +
#* Channel volume set to 12&nbsp;o'clock.
 +
</td>
 +
<td>
 
# The signal source (e.g., {{ToneMatch Mixer}}, mixer, DJ console) output to  
 
# The signal source (e.g., {{ToneMatch Mixer}}, mixer, DJ console) output to  
−
# The Sub1 or Sub2 subwoofer Input 1
+
# The Sub1 or Sub2 subwoofer LINE IN 2
−
# The Sub1 or Sub2 subwoofer Line Out 1 to
+
# The Sub1 or Sub2 subwoofer LINE OUT 2 to
−
# [[File:Compact_Channel_2_Line_Level.png|thumb|Compact Channel 2]]The {{Compact}}  
+
# The second {{Compact}}  
−
#* Connect to Channel 2
+
#* Connect to second L1 Compact Channel 2
 
#* Set the ToneMatch switch to Line Level (down position)  
 
#* Set the ToneMatch switch to Line Level (down position)  
−
#* Channel volume set to 12 o'clock.
+
#* Channel volume set to 12&nbsp;o'clock.
 +
</td>
 +
</tr>
 +
</table>
 +
;Note these settings on the Sub1 or Sub2
 +
:👉 Set LINE IN EQ to '''L1'''
 +
:👉 Set LINE OUT EQ to '''S1''' (Press and hold LINE OUT EQ button for 4 seconds)
  
 
Set up this way,  
 
Set up this way,  
Line 22: Line 40:
 
[[File:S1 Pro with Sub HPF.jpg|560px]]
 
[[File:S1 Pro with Sub HPF.jpg|560px]]
  
 +
;Required cable
 +
Use an XLR to {{1/4 TRS}} cable for best results.
 +
 +
[[File:XLRFemale to 14trs.jpg|300px]]
 +
 +
;Do not use an XLR cable from the Sub to {{Compact}} Channel 1
 +
* {{Compact}} Channel 1 is for dynamic microphones and has a ToneMatch Preset for Handheld Vocal microphones permanently applied
 +
* If you use an XLR to XLR cable, the signal will be too hot for the {{Compact}}
 +
 +
; Not recommended - Sound source to {{Compact}} and {{Compact}} Line Out to Sub
 
If you use the {{Compact}} as the sound source (e.g., microphone and guitar) and connect the {{Compact}} Line Out to the Sub
 
If you use the {{Compact}} as the sound source (e.g., microphone and guitar) and connect the {{Compact}} Line Out to the Sub
−
# The {{Compact}} will sound the same as without the subwoofer (down to 65 Hz)
+
# The {{Compact}} will sound the same as without the subwoofer (65 Hz to 14 KHz)
 
# The Sub1 or Sub2 will cover from 40 Hz (Sub1) 37 Hz (Sub2) to 150 Hz
 
# The Sub1 or Sub2 will cover from 40 Hz (Sub1) 37 Hz (Sub2) to 150 Hz
  

Latest revision as of 15:28, 6 October 2022

T4S This information is applicable to the T4S ToneMatch® mixer
T8S This information is applicable to the T8S ToneMatch® mixer
L1 Compact
Sub1 Sub2 This information is applicable to the Sub1/Sub2

Connections with Sub1 or Sub2 and the L1 Compact

For best results, the signal flow should go from

First L1 CompactSecond L1 Compact (if you have two)
  1. Sub io panel
    The signal source (e.g., ToneMatch Mixer[1], mixer, DJ console) output to
  2. The Sub1 or Sub2 subwoofer LINE IN 1
  3. The Sub1 or Sub2 subwoofer LINE OUT 1 to
  4. Compact Channel 2
    The L1 Compact
    • Connect to L1 Compact Channel 2
    • Set the ToneMatch switch to Line Level (down position)
    • Channel volume set to 12 o'clock.
  1. The signal source (e.g., ToneMatch Mixer[1], mixer, DJ console) output to
  2. The Sub1 or Sub2 subwoofer LINE IN 2
  3. The Sub1 or Sub2 subwoofer LINE OUT 2 to
  4. The second L1 Compact
    • Connect to second L1 Compact Channel 2
    • Set the ToneMatch switch to Line Level (down position)
    • Channel volume set to 12 o'clock.
Note these settings on the Sub1 or Sub2
👉 Set LINE IN EQ to L1
👉 Set LINE OUT EQ to S1 (Press and hold LINE OUT EQ button for 4 seconds)

Set up this way,

  1. The Sub1 or Sub2 handles frequencies from 40 Hz (Sub1) 37 Hz (Sub2) to 150 Hz
  2. The L1 Compact handles frequencies above 150 Hz

S1 Pro with Sub HPF.jpg

Required cable

Use an XLR to 1/4 inch (6.35 mm) Tip-Ring-Sleeve cable for best results.

XLRFemale to 14trs.jpg

Do not use an XLR cable from the Sub to L1 Compact Channel 1
  • L1 Compact Channel 1 is for dynamic microphones and has a ToneMatch Preset for Handheld Vocal microphones permanently applied
  • If you use an XLR to XLR cable, the signal will be too hot for the L1 Compact
Not recommended - Sound source to L1 Compact and L1 Compact Line Out to Sub

If you use the L1 Compact as the sound source (e.g., microphone and guitar) and connect the L1 Compact Line Out to the Sub

  1. The L1 Compact will sound the same as without the subwoofer (65 Hz to 14 KHz)
  2. The Sub1 or Sub2 will cover from 40 Hz (Sub1) 37 Hz (Sub2) to 150 Hz
  1. ↑ 1.0 1.1 T4S ToneMatch mixer or T8S ToneMatch mixer or T1 ToneMatch Audio Engine
Retrieved from "https://toonz.ca/bose/wiki/index.php?title=Template:L1_Compact_with_Sub1_or_Sub2&oldid=23804"