Difference between revisions of "S1 Pro+ To L1 Pro"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
(Created page with "{{S1 Pro+ icon}} {{L1 Pro icon}} {{DivToc |RightHead = S1 Pro+ to L1 Pro |RightBody = Connect an S1 Pro+ to an L1 Pro 300px|Right The object...")
 
m
 
(13 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
{{S1 Pro+ icon}} {{L1 Pro icon}}
+
{{L1 Pro icon}}{{S1 Pro+ icon}}  
 
{{DivToc
 
{{DivToc
  
Line 5: Line 5:
  
 
|RightBody = Connect an S1 Pro+ to an L1 Pro
 
|RightBody = Connect an S1 Pro+ to an L1 Pro
−
[[File:S1 Pro+ to L1 Pro1.jpg|300px|Right]]
 
−
The objective is to use the S1 Pro+ as the stage monitor and the L1 Pro will be the main loudspeaker for the audience; the Front of House system (FOH).
 
  
 
You will connect your microphone and or instruments to the S1 Pro+
 
You will connect your microphone and or instruments to the S1 Pro+
 +
 +
The objective is to use the S1 Pro+ as the stage monitor facing the performer(s) and the L1 Pro will be the main loudspeaker for the audience; the Front of House system (FOH).
 +
 +
 +
[[File:S1 Pro+ to L1 Pro1.jpg|300px|Right]]
  
  
Line 19: Line 22:
 
[[Category:Connections]]
 
[[Category:Connections]]
 
}}
 
}}
−
 
−
To connect an S1 Pro+ to an L1 Pro using a wired connection.
 
  
 
====Terms used====
 
====Terms used====
Line 28: Line 29:
  
 
;L1 Pro (main loudspeaker for the audience - Front of House)
 
;L1 Pro (main loudspeaker for the audience - Front of House)
−
:This is the L1 Pro to which you send the sound from S1 Pro
+
:This is the L1 Pro to which you send the sound from S1 Pro+
  
 
==== Set Up ====
 
==== Set Up ====
−
# Turn down the volume on both S1 Pro+ systems. On S1 Pro+ 2, on input 3 (preferred), set the Bass and Treble to 12:00 o'clock. If using channels 1 or 2, set the Bass and Treble to 12:00 o'clock and set ToneMatch to Off, and Reverb all the way down.
+
# S1 Pro+ Turn down the volume on all channels.  
−
# Connect the S1 Pro+ 1 Line Out (XLR connection) to L1 Pro Aux Input (input 3). The Aux Input is for line-level sources, and the best match for the line-level output of S1 Pro+.
+
# L1 Pro  
−
<br>[[File:S1 Pro+ Daisy Connection.jpg|800px]]
+
#* Turn down the volume on all channels.
−
<!-- <br>[[File:S1 Pro+ Line Out.jpg|300px]][[File:S1 Pro+ 14Aux.jpg|300px]] -->
 
−
<br>[[File:XLR Female to 14 TRS.jpg|300px]] or use an XLR cable with a converter<br>[[File:XLR cable.jpg|300px]][[File:XLR Female to 14 TRS Adapter.jpg|200px]]
 
−
 
 
−
==== Levels ====
 
−
# On S1 Pro+ 1, bring up the channel volumes to the desired levels
 
−
# On S1 Pro+ 2, bring up channel 3 volume to suit your application. Note: This will not necessarily match the same position on the dials as S1 Pro+ 1
 
 
#* Set Bass and Treble at 12:00 o'clock (flat)
 
#* Set Bass and Treble at 12:00 o'clock (flat)
−
#* If connecting to channels 1 or 2, set Reverb off (see alternate connection below)
+
#* Set Reverb off
 +
#* Set ToneMatch to Off on channels 1 and 2
  
−
==== Alternate Connection ====
+
==== XLR Cable ====
−
You can use an XLR cable (mic cable) from S1 Pro+ 1 to S1 Pro+ 2 channels 1 or 2 (XLR inputs).
+
Use an XLR cable (e.g., microphone cable) to connect the S1 Pro+ Line Out to L1 Pro channel 1 or 2.
 +
*The advantage to this method is XLR cables are common and easily found
 +
*The disadvantage is you takes up a full-featured channel on the L1 Pro
 +
[[File:S1 Pro+ to L1 Pro2.jpg|800px]]
  
−
[[File:S1 Pro+ Daisy ConnectionXLR.jpg|800px]]  
+
==== XLR to 1/4 inch (6.3 mm) Tip-Ring-Sleeve ====
 +
Use an XLR to 1/4 inch (6.3 mm) Tip-Ring-Sleeve cable
 +
*The advantage to this method is this leaves both full-featured channels (1 & 2) on the L1 Pro available for other uses
 +
[[File:S1 Pro+ to L1 Pro3.jpg|800px]]
  
−
XLR Cable
+
<br>or use an XLR cable with a converter<br>[[File:XLR cable.jpg|300px]][[File:XLR Female to 14 TRS Adapter.jpg|200px]]
  
−
[[File:XLR cable.jpg|300px]]
+
==== Levels ====
−
 
+
# On S1 Pro+, bring up the channel volumes to the desired levels
−
 
+
# On L1 Pro, bring up the channel volume to suit your application. Note: This will not necessarily match the same position on the dials as S1 Pro+
−
The signal may clip excessively, overload, or be too high to control the volume. To attenuate (reduce) the signal, use a -20 dB or -30 dB [[Pad]]
+
# Turn down the volume on any unused channels
−
 
 
−
 
 
−
[[Pad]]
 
−
 
 
−
[[File:Pad.jpg|link=Pad|More about Pads]]
 
  
−
Click image for more information about Pads
 
 
----
 
----
 
[[Category:S1 Pro+]]
 
[[Category:S1 Pro+]]

Latest revision as of 23:11, 18 August 2024

L1 Pro This information is applicable to the L1 Pro
S1 Pro+  This information is applicable to the S1 Pro+ system


S1 Pro+ to L1 Pro

Connect an S1 Pro+ to an L1 Pro

You will connect your microphone and or instruments to the S1 Pro+

The objective is to use the S1 Pro+ as the stage monitor facing the performer(s) and the L1 Pro will be the main loudspeaker for the audience; the Front of House system (FOH).


Right

Terms used

S1 Pro+ (stage monitor and mixer)
This is the S1 Pro+ to which you have connected your microphone and or instruments using inputs 1, 2, 3
L1 Pro (main loudspeaker for the audience - Front of House)
This is the L1 Pro to which you send the sound from S1 Pro+

Set Up

  1. S1 Pro+ Turn down the volume on all channels.
  2. L1 Pro
    • Turn down the volume on all channels.
    • Set Bass and Treble at 12:00 o'clock (flat)
    • Set Reverb off
    • Set ToneMatch to Off on channels 1 and 2

XLR Cable

Use an XLR cable (e.g., microphone cable) to connect the S1 Pro+ Line Out to L1 Pro channel 1 or 2.

  • The advantage to this method is XLR cables are common and easily found
  • The disadvantage is you takes up a full-featured channel on the L1 Pro

S1 Pro+ to L1 Pro2.jpg

XLR to 1/4 inch (6.3 mm) Tip-Ring-Sleeve

Use an XLR to 1/4 inch (6.3 mm) Tip-Ring-Sleeve cable

  • The advantage to this method is this leaves both full-featured channels (1 & 2) on the L1 Pro available for other uses

S1 Pro+ to L1 Pro3.jpg


or use an XLR cable with a converter
XLR cable.jpgXLR Female to 14 TRS Adapter.jpg

Levels

  1. On S1 Pro+, bring up the channel volumes to the desired levels
  2. On L1 Pro, bring up the channel volume to suit your application. Note: This will not necessarily match the same position on the dials as S1 Pro+
  3. Turn down the volume on any unused channels
Retrieved from "https://toonz.ca/bose/wiki/index.php?title=S1_Pro%2B_To_L1_Pro&oldid=24729"