Difference between revisions of "L1 Inputs General Information"
m (→ToneMatch Mixers (T1, T4S/T8S) |
m (→Combo Jacks (Inputs 1 and 2)) |
||
(2 intermediate revisions by the same user not shown) | |||
Line 6: | Line 6: | ||
* When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs. | * When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs. | ||
;Note: | ;Note: | ||
− | :Unlike the L1, F1, and S1 models, the ToneMatch mixers (T1, T4S/T8S) have input trim controls to adjust the input sensitivity. | + | :Unlike the L1, F1, and S1 models, the ToneMatch mixers (T1, T4S/T8S) have input trim controls to adjust the input sensitivity. This means that you can connect line-level sources to the XLR inputs and adjust the input sensitivity with the trim controls. |
=== Aux Inputs === | === Aux Inputs === | ||
Line 13: | Line 13: | ||
* On the T8S the Aux inputs are 9/10 | * On the T8S the Aux inputs are 9/10 | ||
These are balanced line-level inputs. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. Using a 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain. | These are balanced line-level inputs. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. Using a 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain. | ||
+ | |||
+ | == L1 Model II/ Model 1S== | ||
+ | === Power Stand Analog Input === | ||
+ | This is a 1/4 inch (6.3 mm) Tip-Ring-Sleeve jack. | ||
+ | |||
+ | It is a balanced line-level input. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. A 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain. | ||
+ | |||
+ | Adjust the input level with the Analog Input Trim control. Set the trim so the LED light is a solid green. If you see red, turn it down. | ||
== L1 Pro == | == L1 Pro == | ||
Line 20: | Line 28: | ||
* When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs. | * When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs. | ||
− | The L1 Pro systems are unique among all the Bose Portable PA systems because | + | The L1 Pro systems are unique among all the Bose Portable PA systems because a Digital Signal Processor automatically sets the input gain (like an automatic trim control). |
− | Trim: 0 dB, 12 dB, 24 dB, 36 dB, and 45 dB analog gain steps | + | Trim: The DSP automatically selects and compensates 0 dB, 12 dB, 24 dB, 36 dB, and 45 dB analog gain steps. This means that you can connect line-level sources to the XLR inputs, and the DSP will adjust the input sensitivity automatically. |
== S1 Pro == | == S1 Pro == |
Latest revision as of 21:43, 13 September 2024
General information about inputs
Contents
ToneMatch Mixers (T1, T4S/T8S)
Combo Jacks
- The XLR inputs are microphone-level inputs.
- The 1/4-inch Tip-Ring-Sleeve jacks are line-level inputs.
- When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs.
- Note
- Unlike the L1, F1, and S1 models, the ToneMatch mixers (T1, T4S/T8S) have input trim controls to adjust the input sensitivity. This means that you can connect line-level sources to the XLR inputs and adjust the input sensitivity with the trim controls.
Aux Inputs
- The T1 4/5 inputs are Aux inputs.
- On the T4S the Aux inputs are 5/6
- On the T8S the Aux inputs are 9/10
These are balanced line-level inputs. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. Using a 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain.
L1 Model II/ Model 1S
Power Stand Analog Input
This is a 1/4 inch (6.3 mm) Tip-Ring-Sleeve jack.
It is a balanced line-level input. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. A 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain.
Adjust the input level with the Analog Input Trim control. Set the trim so the LED light is a solid green. If you see red, turn it down.
L1 Pro
Combo Jacks (Inputs 1 and 2)
- The XLR inputs are microphone-level inputs.
- The 1/4-inch Tip-Ring-Sleeve jacks are line-level inputs.
- When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs.
The L1 Pro systems are unique among all the Bose Portable PA systems because a Digital Signal Processor automatically sets the input gain (like an automatic trim control).
Trim: The DSP automatically selects and compensates 0 dB, 12 dB, 24 dB, 36 dB, and 45 dB analog gain steps. This means that you can connect line-level sources to the XLR inputs, and the DSP will adjust the input sensitivity automatically.
S1 Pro
Combo Jacks (Inputs 1 and 2)
- The XLR inputs are microphone-level inputs.
- The 1/4-inch Tip-Ring-Sleeve jacks are line-level inputs.
- When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs.
S1 Pro+
Combo Jacks (Inputs 1 and 2)
- The XLR inputs are microphone-level inputs.
- The 1/4-inch Tip-Ring-Sleeve jacks are line-level inputs.
- When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs.
Aux Input
This refers to the 1/4 inch (6.3 mm) Tip-Ring-Sleeve Aux Jack on channel 3
This is a balanced line-level input. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. Using a 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain.
F1 812
The F1 systems have a mic/line level input sensitivity switch on input one.