Difference between revisions of "L1 Inputs General Information"
m (→ToneMatch Mixers (T1, T4S/T8S)) |
m |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | {{DivToc | |
| + | |||
| + | |RightHead = Introduction | ||
| + | |||
| + | |RightBody = The Bose Portable PA systems have several types of inputs: | ||
| + | * XLR/ 1/4 inch (6.3 mm) Tip-Ring-Sleeve combo jacks | ||
| + | * 1/4 inch (6.3 mm) Tip-Ring-Sleeve / Tip-Sleeve jacks | ||
| + | * 1/8 inch (3.5 mm) Tip-Ring-Sleeve jacks | ||
| + | |||
| + | ;XLR | ||
| + | : The XLR inputs are microphone-level, and you should avoid using line-level sources except for models with trim controls (ToneMatch Mixers) or automatic DSP trim (L1 Pro) | ||
| + | |||
| + | ; 1/4 inch (6.3 mm) Tip-Ring-Sleeve | ||
| + | : For line-level, balanced sources | ||
| + | |||
| + | ; 1/4 inch (6.3mm) Tip-Sleeve | ||
| + | : For instrument level (high impedance) sources | ||
| + | |||
| + | ; 1/8 inch (3.5 mm) Tip-Ring-Sleeve | ||
| + | : For stereo sources at consumer line-level (e.g., headphone jack outputs from phones/tablets/computers) | ||
| + | |||
| + | For details for a specific model, follow the links to the left. | ||
| + | |||
| + | |Categories = | ||
| + | |||
| + | [[Category:How To]] | ||
| + | [[Category:Product to which this applies]] | ||
| + | [[Category:Other]] | ||
| + | }} | ||
| + | |||
| + | |||
== ToneMatch Mixers (T1, T4S/T8S) == | == ToneMatch Mixers (T1, T4S/T8S) == | ||
=== Combo Jacks === | === Combo Jacks === | ||
* The XLR inputs are microphone-level inputs. | * The XLR inputs are microphone-level inputs. | ||
* The 1/4-inch Tip-Ring-Sleeve jacks are line-level inputs. | * The 1/4-inch Tip-Ring-Sleeve jacks are line-level inputs. | ||
| − | * When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs. | + | * When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs. These are high-impedance inputs suitable for guitars with bare piezo pickups (no electronics). |
;Note: | ;Note: | ||
:Unlike the L1, F1, and S1 models, the ToneMatch mixers (T1, T4S/T8S) have input trim controls to adjust the input sensitivity. This means that you can connect line-level sources to the XLR inputs and adjust the input sensitivity with the trim controls. | :Unlike the L1, F1, and S1 models, the ToneMatch mixers (T1, T4S/T8S) have input trim controls to adjust the input sensitivity. This means that you can connect line-level sources to the XLR inputs and adjust the input sensitivity with the trim controls. | ||
| Line 13: | Line 43: | ||
* On the T8S the Aux inputs are 9/10 | * On the T8S the Aux inputs are 9/10 | ||
These are balanced line-level inputs. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. Using a 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain. | These are balanced line-level inputs. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. Using a 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain. | ||
| + | |||
| + | == L1 Compact == | ||
| + | === Channel 1 (XLR) === | ||
| + | Channel 1 is microphone-level with a built-in ToneMatch Preset for vocal microphones. Do not connect a line-level source to this input as it will be too hot. Also, you cannot disable the vocal microphone Preset, so this is not generally suitable for full-range inputs. | ||
| + | |||
| + | === Channel 2 === | ||
| + | ====1/4 inch (6.3 mm) Tip-Ring-Sleeve ==== | ||
| + | * If you connect with a 1/4 inch (6.3mm) Tip-Sleeve input, this is an instrument-level input. This is a high-impedance input suitable for guitars with bare piezo pickups (no electronics). If connecting a guitar, set the ToneMatch switch to Guitar (up). For other instruments, set the ToneMatch switch to Line (down). | ||
| + | * If you connect with a 1/4 inch (6.3 mm) Tip-Ring-Sleeve jack, this is a balanced line-level input. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. A 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain. Set the ToneMatch switch to Line (down). | ||
| + | ==== 1/8 inch (3.5 mm) Tip-Ring-Sleeve ==== | ||
| + | This is a stereo input for consumer line-level inputs. The left and right channels are buffered to mono. | ||
| + | |||
== L1 Model II/ Model 1S== | == L1 Model II/ Model 1S== | ||
| Line 23: | Line 65: | ||
== L1 Pro == | == L1 Pro == | ||
| − | === Combo Jacks ( | + | === Combo Jacks (Channels 1 and 2) === |
* The XLR inputs are microphone-level inputs. | * The XLR inputs are microphone-level inputs. | ||
* The 1/4-inch Tip-Ring-Sleeve jacks are line-level inputs. | * The 1/4-inch Tip-Ring-Sleeve jacks are line-level inputs. | ||
| − | * When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs. | + | * When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs. These are high-impedance inputs suitable for guitars with bare piezo pickups (no electronics). |
The L1 Pro systems are unique among all the Bose Portable PA systems because a Digital Signal Processor automatically sets the input gain (like an automatic trim control). | The L1 Pro systems are unique among all the Bose Portable PA systems because a Digital Signal Processor automatically sets the input gain (like an automatic trim control). | ||
| − | Trim: 0 dB, 12 dB, 24 dB, 36 dB, and 45 dB analog gain steps | + | Trim: The DSP automatically selects and compensates 0 dB, 12 dB, 24 dB, 36 dB, and 45 dB analog gain steps. This means that you can connect line-level sources to the XLR inputs, and the DSP will adjust the input sensitivity automatically. |
| + | |||
| + | === 1/4 inch (6.3 mm) Tip-Ring-Sleeve (Channel 3) === | ||
| + | This is a balanced line-level input. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. | ||
| + | |||
| + | A 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain compared to a balanced connection. | ||
| + | |||
| + | This also accepts instrument-level sources except guitars without a built-in preamp. | ||
| + | |||
| + | ==== 1/8 inch (3.5 mm) Tip-Ring-Sleeve ==== | ||
| + | This is a stereo input for consumer line-level inputs. The left and right channels are buffered to mono. | ||
| + | |||
== S1 Pro == | == S1 Pro == | ||
| Line 36: | Line 89: | ||
* The XLR inputs are microphone-level inputs. | * The XLR inputs are microphone-level inputs. | ||
* The 1/4-inch Tip-Ring-Sleeve jacks are line-level inputs. | * The 1/4-inch Tip-Ring-Sleeve jacks are line-level inputs. | ||
| − | * When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs. | + | * When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs. These are high-impedance inputs suitable for guitars with bare piezo pickups (no electronics). |
| Line 43: | Line 96: | ||
* The XLR inputs are microphone-level inputs. | * The XLR inputs are microphone-level inputs. | ||
* The 1/4-inch Tip-Ring-Sleeve jacks are line-level inputs. | * The 1/4-inch Tip-Ring-Sleeve jacks are line-level inputs. | ||
| − | * When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs. | + | * When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs. These are high-impedance inputs suitable for guitars with bare piezo pickups (no electronics). |
=== Aux Input === | === Aux Input === | ||
This refers to the 1/4 inch (6.3 mm) Tip-Ring-Sleeve Aux Jack on channel 3 | This refers to the 1/4 inch (6.3 mm) Tip-Ring-Sleeve Aux Jack on channel 3 | ||
| − | This is a balanced line-level input. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. Using a 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain. | + | This is a balanced line-level input. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. Using a 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain compared to a balanced connection. |
| − | |||
| + | This also accepts instrument-level sources except guitars without a built-in preamp. | ||
== F1 812 == | == F1 812 == | ||
Latest revision as of 01:15, 14 September 2024
Introduction
The Bose Portable PA systems have several types of inputs:
- XLR/ 1/4 inch (6.3 mm) Tip-Ring-Sleeve combo jacks
- 1/4 inch (6.3 mm) Tip-Ring-Sleeve / Tip-Sleeve jacks
- 1/8 inch (3.5 mm) Tip-Ring-Sleeve jacks
- XLR
- The XLR inputs are microphone-level, and you should avoid using line-level sources except for models with trim controls (ToneMatch Mixers) or automatic DSP trim (L1 Pro)
- 1/4 inch (6.3 mm) Tip-Ring-Sleeve
- For line-level, balanced sources
- 1/4 inch (6.3mm) Tip-Sleeve
- For instrument level (high impedance) sources
- 1/8 inch (3.5 mm) Tip-Ring-Sleeve
- For stereo sources at consumer line-level (e.g., headphone jack outputs from phones/tablets/computers)
For details for a specific model, follow the links to the left.
ToneMatch Mixers (T1, T4S/T8S)
Combo Jacks
- The XLR inputs are microphone-level inputs.
- The 1/4-inch Tip-Ring-Sleeve jacks are line-level inputs.
- When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs. These are high-impedance inputs suitable for guitars with bare piezo pickups (no electronics).
- Note
- Unlike the L1, F1, and S1 models, the ToneMatch mixers (T1, T4S/T8S) have input trim controls to adjust the input sensitivity. This means that you can connect line-level sources to the XLR inputs and adjust the input sensitivity with the trim controls.
Aux Inputs
- The T1 4/5 inputs are Aux inputs.
- On the T4S the Aux inputs are 5/6
- On the T8S the Aux inputs are 9/10
These are balanced line-level inputs. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. Using a 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain.
L1 Compact
Channel 1 (XLR)
Channel 1 is microphone-level with a built-in ToneMatch Preset for vocal microphones. Do not connect a line-level source to this input as it will be too hot. Also, you cannot disable the vocal microphone Preset, so this is not generally suitable for full-range inputs.
Channel 2
1/4 inch (6.3 mm) Tip-Ring-Sleeve
- If you connect with a 1/4 inch (6.3mm) Tip-Sleeve input, this is an instrument-level input. This is a high-impedance input suitable for guitars with bare piezo pickups (no electronics). If connecting a guitar, set the ToneMatch switch to Guitar (up). For other instruments, set the ToneMatch switch to Line (down).
- If you connect with a 1/4 inch (6.3 mm) Tip-Ring-Sleeve jack, this is a balanced line-level input. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. A 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain. Set the ToneMatch switch to Line (down).
1/8 inch (3.5 mm) Tip-Ring-Sleeve
This is a stereo input for consumer line-level inputs. The left and right channels are buffered to mono.
L1 Model II/ Model 1S
Power Stand Analog Input
This is a 1/4 inch (6.3 mm) Tip-Ring-Sleeve jack.
It is a balanced line-level input. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. A 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain.
Adjust the input level with the Analog Input Trim control. Set the trim so the LED light is a solid green. If you see red, turn it down.
L1 Pro
Combo Jacks (Channels 1 and 2)
- The XLR inputs are microphone-level inputs.
- The 1/4-inch Tip-Ring-Sleeve jacks are line-level inputs.
- When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs. These are high-impedance inputs suitable for guitars with bare piezo pickups (no electronics).
The L1 Pro systems are unique among all the Bose Portable PA systems because a Digital Signal Processor automatically sets the input gain (like an automatic trim control).
Trim: The DSP automatically selects and compensates 0 dB, 12 dB, 24 dB, 36 dB, and 45 dB analog gain steps. This means that you can connect line-level sources to the XLR inputs, and the DSP will adjust the input sensitivity automatically.
1/4 inch (6.3 mm) Tip-Ring-Sleeve (Channel 3)
This is a balanced line-level input. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug.
A 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain compared to a balanced connection.
This also accepts instrument-level sources except guitars without a built-in preamp.
1/8 inch (3.5 mm) Tip-Ring-Sleeve
This is a stereo input for consumer line-level inputs. The left and right channels are buffered to mono.
S1 Pro
Combo Jacks (Inputs 1 and 2)
- The XLR inputs are microphone-level inputs.
- The 1/4-inch Tip-Ring-Sleeve jacks are line-level inputs.
- When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs. These are high-impedance inputs suitable for guitars with bare piezo pickups (no electronics).
S1 Pro+
Combo Jacks (Inputs 1 and 2)
- The XLR inputs are microphone-level inputs.
- The 1/4-inch Tip-Ring-Sleeve jacks are line-level inputs.
- When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs. These are high-impedance inputs suitable for guitars with bare piezo pickups (no electronics).
Aux Input
This refers to the 1/4 inch (6.3 mm) Tip-Ring-Sleeve Aux Jack on channel 3
This is a balanced line-level input. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. Using a 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain compared to a balanced connection.
This also accepts instrument-level sources except guitars without a built-in preamp.
F1 812
The F1 systems have a mic/line level input sensitivity switch on input one.