Difference between revisions of "Talk:Mixer / Behringer / UB1222FX-Pro"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m (Mon out is pre fader.)
 
(4 intermediate revisions by the same user not shown)
Line 12: Line 12:
 
Much appreciated [[User:ST|ST]] 10:03, 14 August 2007 (GMT-7)
 
Much appreciated [[User:ST|ST]] 10:03, 14 August 2007 (GMT-7)
  
== aha, the ¼  inch output is the Mon Out  ==
 
  
I've re-written the article to emphasize that for a ¼ inch output you have to use the '''Mon Out'''.
+
== Mon out is pre fader. ==
 
+
It turns out that the Mon Out is pre-fader (thanks to [[User:HellDad|HellDad]]) for pointing that out. So I re-wrote the article to recommend using the XLR Main outputs.
Thanks again
+
[[User:ST|ST]] 12:41, 14 August 2007 (GMT-7)
 
 
[[User:ST|ST]] 10:12, 14 August 2007 (GMT-7)
 
 
 
== Mon out is pre fader. ==
 
 
 
==Behringer Mixer UB1222FX Outputs?==
 
I use one of these mixers, and it doesn't have 1/4" TRS or TS outputs for main L/R - only male XLR. I thought maybe I could put a note in the article to that effect, but then thought I better mention it on this discussion page first. Not least because I have zero experience and knowledge on the subject of editing a Wiki (apart from the recent hour of tutorials).
 
 
 
[[User:HellDad|HellDad]] 09:59, 14 August 2007 (GMT-7)
 
 
 
== XLR or ¼ inch Main Outs ==
 
 
 
Thanks HellDad,
 
 
 
I'll find a way to incorporate that into the main article.  
 
 
 
Much appreciated [[User:ST|ST]] 10:03, 14 August 2007 (GMT-7)
 
 
 
== aha, the ¼  inch output is the Mon Out  ==
 
 
 
I've re-written the article to emphasize that for a ¼ inch output you have to use the '''Mon Out'''.
 
 
 
Thanks again
 
 
 
[[User:ST|ST]] 10:12, 14 August 2007 (GMT-7)
 

Latest revision as of 01:59, 21 December 2008

Behringer Mixer UB1222FX Outputs?

I use one of these mixers, and it doesn't have 1/4" TRS or TS outputs for main L/R - only male XLR. I thought maybe I could put a note in the article to that effect, but then thought I better mention it on this discussion page first. Not least because I have zero experience and knowledge on the subject of editing a Wiki (apart from the recent hour of tutorials).

HellDad 09:59, 14 August 2007 (GMT-7)

XLR or ¼ inch Main Outs

Thanks HellDad,

I'll find a way to incorporate that into the main article.

Much appreciated ST 10:03, 14 August 2007 (GMT-7)


Mon out is pre fader.

It turns out that the Mon Out is pre-fader (thanks to HellDad) for pointing that out. So I re-wrote the article to recommend using the XLR Main outputs. ST 12:41, 14 August 2007 (GMT-7)