Difference between revisions of "T1 ToneMatch® Audio Engine / USB / Controlling the Volume"
m (New page: The default setup in the {{T1}} is that the USB from PC signal is routed to the Master output. If you need to set the volume relative to the other T1® Channels then you have to do that wi...) |
m (ST moved page T1 ToneMatch® Audio Engine / USB / Controlling the Volume to T1 ToneMatch® Audio Engine / USB / Controlling the Volume) |
||
(2 intermediate revisions by the same user not shown) | |||
Line 7: | Line 7: | ||
* Turn the main selector to '''Prefs'''. | * Turn the main selector to '''Prefs'''. | ||
* Select '''USB from PC''' | * Select '''USB from PC''' | ||
− | [[Image:T1PrefsUSB.gif] | + | [[Image:T1PrefsUSB.gif]] |
Line 16: | Line 16: | ||
[[Image:T1USBfromPCCH45.gif]] | [[Image:T1USBfromPCCH45.gif]] | ||
− | Now the volume is controlled by the Channel 4/5 Vol control. | + | Now the volume of your USB device, relative to the other T1® Channels, is controlled by the Channel 4/5 Vol control. |
---- | ---- |
Latest revision as of 05:06, 26 March 2017
The default setup in the T1 ToneMatch Audio Engine is that the USB from PC signal is routed to the Master output. If you need to set the volume relative to the other T1® Channels then you have to do that with your USB device, probably a computer.
If you want to route the USB from PC to a T1® Channel, keep reading.
USB to PC
Prefs
- Turn the main selector to Prefs.
- Select USB from PC
- Set Left: Ch 4/5
- Set Right: CH 4/5
Now the volume of your USB device, relative to the other T1® Channels, is controlled by the Channel 4/5 Vol control.