Difference between revisions of "Compact Extensions Sticking"
m |
m |
||
| Line 16: | Line 16: | ||
[http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/743103812?r=658100322#658100322 Source: Neil-at-Bose] | [http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/743103812?r=658100322#658100322 Source: Neil-at-Bose] | ||
| − | [http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/743103812 original discussion: Compact Extensions Getting Difficult to Insert] | + | [http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/743103812 original discussion: Compact Extensions Getting Difficult to Insert] |
| + | |||
| + | <noinclude>Learn more about the {{Compact}} | ||
| + | </noinclude> | ||
---- | ---- | ||
[[Category:Compact]] | [[Category:Compact]] | ||
Revision as of 12:03, 2 November 2010
All,
For those folks that are experiencing this issue we can confirm that using a “dry lubricant with Teflon” would be an acceptable solution. This can be sprayed onto a cloth and wiped onto the inside of the extension & array tracks and the inside of the lower extension electrical housing.
Note: Please do not spray directly near the electrical connections:
There are many manufactures that offer similar products, one in particular that we have used in the past with success is the TRI−FLOW* Superior Dry Lubricant with Teflon* produced by Sherman Williams, please note that we do not endorse any one product in particular – we are merely trying to provide you with a point of reference.
I hope this information is helpful.
Thank you, Neil
original discussion: Compact Extensions Getting Difficult to Insert
Learn more about the L1 Compact