Difference between revisions of "Model 1S Model II Cylindrical Radiators"
m (New page: ==== Cylindrical Radiator®s ==== * Top sections are physically identical (same dimensions). Note: The actual model designation is on the label on the back channel. * Top array 39.63...) |
m |
||
| Line 1: | Line 1: | ||
==== Cylindrical Radiator®s ==== | ==== Cylindrical Radiator®s ==== | ||
| − | + | ===== Top Section ===== | |
| + | Top sections are physically identical (same dimensions). | ||
Note: The actual model designation is on the label on the back channel. | Note: The actual model designation is on the label on the back channel. | ||
| Line 9: | Line 10: | ||
[[Image:Model 1s Model II CR02.jpg]] | [[Image:Model 1s Model II CR02.jpg]] | ||
| − | + | ===== Lower Section ===== | |
| + | Lower sections are physically different (Model 1S is 3.9" shorter). | ||
** Model 1S is approximately 39.63” H x 4.15” W x 4.13” D (100.6 cm x 10.6 cm x 10.5 cm) | ** Model 1S is approximately 39.63” H x 4.15” W x 4.13” D (100.6 cm x 10.6 cm x 10.5 cm) | ||
** Model II is approximately 43.5” H x 4.15” W x 4.13” D (111.0 mm x 9.0 cm x 10.5 cm) | ** Model II is approximately 43.5” H x 4.15” W x 4.13” D (111.0 mm x 9.0 cm x 10.5 cm) | ||
| Line 19: | Line 21: | ||
; Top caps are identical | ; Top caps are identical | ||
[[Image:Model 1s Model II CR03.jpg]] | [[Image:Model 1s Model II CR03.jpg]] | ||
| + | |||
| + | ===== Questions ===== | ||
| + | Q: Can I use the Model 1S lower extension (no drivers) in the Model II with the Model II Cylindrical Radiator® top section? | ||
| + | :A: No. No sound will come out from the top section. | ||
<noinclude>---- | <noinclude>---- | ||
[[Category:Model 1S]] | [[Category:Model 1S]] | ||
[[Category:Model II]]</noinclude> | [[Category:Model II]]</noinclude> | ||
Revision as of 21:10, 24 October 2012
Cylindrical Radiator®s
Top Section
Top sections are physically identical (same dimensions).
Note: The actual model designation is on the label on the back channel.
- Top array 39.63” H x 4.15” W x 4.13” D (100.6 cm x 10.6 cm x 10.5 cm)
- Model 1S has silver background
- Model II has black background
Lower Section
Lower sections are physically different (Model 1S is 3.9" shorter).
- Model 1S is approximately 39.63” H x 4.15” W x 4.13” D (100.6 cm x 10.6 cm x 10.5 cm)
- Model II is approximately 43.5” H x 4.15” W x 4.13” D (111.0 mm x 9.0 cm x 10.5 cm)
- Close up view of the ends (Model 1S on top, Model II below)
- Top caps are identical
Questions
Q: Can I use the Model 1S lower extension (no drivers) in the Model II with the Model II Cylindrical Radiator® top section?
- A: No. No sound will come out from the top section.