Template:TC-Helicon to L1®

Usage:

{{TC-Helicon to L1®
|L1=[[Compact]]
|Model parameter 1= [[Compact#Channel_1|Compact Channel 1]]
|Model parameter 2= [[Compact#Channel_2|Compact Channel 2]]
|TCH=[http://www.tc-helicon.com/products/voicelive-play-gtx/ VoiceLive Play GTX]
}}

L1 Model 1S

L1 Model II

The {{{TCH}}} has two outputs available (Vocal and Guitar) but I choose the LEFT output and run MONO so that I can make the connection with one cable. I don't use Compact Channel 1 when I'm using the {{{TCH}}}.

I prefer to use an adapter (XLR to ¼ inch jack) from the {{{TCH}}} left out - to Compact Channel 1. That way you don't have to work around the {{{L1}}}'s internal microphone Preset. There's MIX button the {{{TCH}}} that brings up a screen where its EASY to control the relative volumes (voice and guitar) on the GTX so I don't have to touch the Compact once I'm set up. And it's nice to use just one cable from the {{{TCH}}} to the {{{L1}}}. This also keeps the Compact Channel 1 free in case I need to plug in another microphone.

I use an adapter like this

xlr female to 1/4 female adapter

]

using a ¼ inch jack Tip-Ring-Sleeve cable

TO

{{{Model parameter 2}}}