Difference between revisions of "Template:Summing Devices"
m (New page: === Summing Devices === If you have a stereo device (and do not the extra features of a mixer then you can consider a summing device). The following notes are not specific recommendations...) |
m |
||
| Line 4: | Line 4: | ||
==== ⅛ stereo source ==== | ==== ⅛ stereo source ==== | ||
If your source is a ⅛ stereo jack you can use something like this: | If your source is a ⅛ stereo jack you can use something like this: | ||
| + | <!-- | ||
| + | {{#Click:Target|Image:Example.png|90px|Caption is here.}} | ||
| + | --> | ||
| + | {{#Click:http://whirlwindusa.com/catalog/black-boxes-effects-and-dis/transformers-isolation-devices/isopod|Image:WhirlwindIsopod.png|300px|Whirlwind Isopod.}} | ||
[[Image:WhirlwindIsopod.png]] | [[Image:WhirlwindIsopod.png]] | ||
Revision as of 19:58, 13 July 2014
Summing Devices
If you have a stereo device (and do not the extra features of a mixer then you can consider a summing device). The following notes are not specific recommendations or endorsements.
⅛ stereo source
If your source is a ⅛ stereo jack you can use something like this:
{{#Click:http://whirlwindusa.com/catalog/black-boxes-effects-and-dis/transformers-isolation-devices/isopod%7CImage:WhirlwindIsopod.png%7C300px%7CWhirlwind Isopod.}}
The output side is XLR so you will also need a converter or cable that is XLR femail to Balanced ¼ inch jack Tip-Ring-Sleeve.
[http://www.audiopile.net/products/Mic_Instr_Cables/MP_Adaptor_Cbls/MP-105/MP-105_cutsheet.shtml Female XLR to 1/4" Male TRS Balanced Adaptor Cable]
Thanks to Richard Mills for the suggestion.
RCA stereo source
If your source is stereo RCA you can use something like this:
OR
Thanks to Dan Rosebach for the suggestion.