TC-HeliconVoiceSolo FX150 to L1® Compact

{{#img: image=TC-HeliconVoiceSoloFX150.png |page=http://www.tc-helicon.com/en/products/voicesolo-fx150/%7C height=250px |title=TC-Helicon VoiceSolo FX150 }}

The VoiceSolo FX150 Output has a button beside it marked: "Full Mix". Use that (button up)

I prefer to use an adapter (XLR to ¼ inch jack) from the VoiceSolo FX150 Main out - to Compact Channel 2. That way you don't have to work around the Compact's internal microphone Preset.

{{#img: image=Compact_Channel_2_Line_Level.png |page=Compact#Channel_2| width=400px |title=Compact Channel 2}}

Use the VoiceSolo FX150 individual volume control to control the mix, and the master volume for the overall output of the system. It's nice to use just one cable from the VoiceSolo FX150 to the Compact. This also keeps the Compact Channel 1 free in case I need to plug in another microphone.

I use an adapter like this

Neutrik NA3FJ XLR to ¼ inch jack Tip-Ring-Sleeve female	or	Planet Waves XLR female to ¼ inch jack Tip-Ring-Sleeve female
{{#img: image=NeutrikNA3FJ.jpg |page=http://www.audiopile.net/products/Adaptors_Connectors/NEUTRIK/NA3FJ/NA3FJ_cutsheet.shtml%7C width=300px |title=NA3FJ Neutrik 3 Pin XLR Female to 1/4" TRS Female Locking Barrel Adapter}}		{{#img: image=XLRTo14female.png |page=http://www.musiciansfriend.com/accessories/planet-waves-xlr-female-to-1-4-female-adapter%7C width=300px |title=xlr female to 1/4 female adapter}}

WITH

Balanced ¼ inch jack Tip-Ring-Sleeve cable	or	Unbalanced ¼ inch jack Tip-Sleeve cable
{{#img: image=TRStoTRS.jpg |page=http://www.audiopile.net/products/Mic_Instr_Cables/IP-101/IP-101_cutsheet.shtml%7C width=300px |title=¼ inch jack Tip-Ring-Sleeve }}		{{#img: image=TSUnbalanced.jpg |page=http://www.audiopile.net/products/Mic_Instr_Cables/GBNC/GBNC_SOON_cutsheet.shtml%7C width=300px |title=¼ inch jack Tip-Sleeve }}

OR a longer version of a cable like this:

Source: Audiopile.net

Technical Description:

The EWI MP-105 is a special application adaptor cable for converting XLR to 1/4 TRS. This cable is typically used to plug XLR cord into balanced 1/4" TRS panel jacks commonly found on mixing consoles and processing equipment.

The Female XLR end is wired through to the 1/4" Male TRS end as follows:

• Pin One FXLR to Sleeve of MTRS
• Pin Two FXLR to Tip of MTRS
• Pin Three FXLR to Ring of MTRS

The 1/4" MTRS end is an EWI model P292S-BKG

The FXLR end is an EWI model ES3FB-GDP

The cable itself is constructed with 99.98% pure 22ga. high strand count copper conductors.

TO

Compact Channel 2