Difference between revisions of "Mixer Left Output Only"
(Created article) |
m |
||
| Line 1: | Line 1: | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
{{KCS Article | {{KCS Article | ||
|Issue = | |Issue = | ||
| Line 15: | Line 7: | ||
|Resolution = | |Resolution = | ||
| − | Most small stereo mixers allow you to direct the inputs to one side or the other (two sides of the mixer). When you pan an input up the middle, you are using both sides. The two outputs typically go to two powered loudspeakers. | + | Most small stereo mixers allow you to direct the inputs to one side or the other (two sides of the mixer). |
| + | |||
| + | *When you pan an input up the middle, you are using both sides. The two outputs typically go to two powered loudspeakers. | ||
| − | + | *When you pan all your inputs hard LEFT and then use the LEFT output, you are using one side of the mixer and in this situation, you are connecting that to a single powered loudspeaker. The quality should be just as good as using both sides of the mixer | |
The exception: If the mixer has stereo inputs (one channel with two inputs), panning hard to one side means you will lose the other side of the stereo pair. | The exception: If the mixer has stereo inputs (one channel with two inputs), panning hard to one side means you will lose the other side of the stereo pair. | ||
Latest revision as of 10:48, 1 September 2018
Contents
Issue
When using a mixer is some of the quality lost using just the left output?
Environment
Connecting a stereo mixer to a mono L1 . L1 Compact, L1 Model 1S, L1 Model 1S, F1 Model 812 Flexible Array Loudspeaker
Resolution
Most small stereo mixers allow you to direct the inputs to one side or the other (two sides of the mixer).
- When you pan an input up the middle, you are using both sides. The two outputs typically go to two powered loudspeakers.
- When you pan all your inputs hard LEFT and then use the LEFT output, you are using one side of the mixer and in this situation, you are connecting that to a single powered loudspeaker. The quality should be just as good as using both sides of the mixer
The exception: If the mixer has stereo inputs (one channel with two inputs), panning hard to one side means you will lose the other side of the stereo pair.
Related conversation L1 Compact in the Ask Bose for Help forum
Cause
Not applicable to this question