Difference between revisions of "T8S to One L1 Model II"
m |
m (→Connect the T8S to {{Model II}}) |
||
| Line 1: | Line 1: | ||
| + | Connect the ToneMatch Power Supply to the {{T8S}} for power. | ||
| + | |||
== Connect the T8S to {{Model II}} == | == Connect the T8S to {{Model II}} == | ||
| Line 5: | Line 7: | ||
{{Balanced TRS from T8S to L1 Model II}} | {{Balanced TRS from T8S to L1 Model II}} | ||
| − | + | OR | |
| + | |||
| + | [[File:T8S to L1 Model II x 1 XLR.png|600px]] | ||
| + | |||
| + | {{ | ||
| + | Balanced XLR |Source= [[T8S]] |Target= {{Model II}} | ||
| + | }} | ||
== Connecting the [[T8S]] to the {{Model II}} == | == Connecting the [[T8S]] to the {{Model II}} == | ||
Revision as of 21:56, 12 March 2019
Connect the ToneMatch Power Supply to the T8S ToneMatch mixer for power.
Contents
Connect the T8S to L1 Model II
The output from the T8S ToneMatch mixer is a balanced mono 1/4 inch (6.35 mm) Tip-Ring-Sleeve and the input on the L1 Model II is a balanced mono 1/4 inch (6.35 mm) Tip-Ring-Sleeve so use a cable like this.
.
1/4" TRS Balanced Patch Cable (audiopile.net)
OR
The output from the T8S is a balanced mono XLR and the input on the L1 Model II is a balanced mono 1/4 inch (6.35 mm) Tip-Ring-Sleeve so use a cable like this.
.
XLR Female to 1/4" Male TRS Cable
Connecting the T8S to the L1 Model II
L1 Model II Analog Input
The Analog input is a ¼ inch balanced input jack.
Analog input trim (volume, or gain) control
Set the L1 Model II Analog Input trim control to match the output of the T8S ToneMatch mixer.
- Set the Trim control on the power stand to the 0 (zero) position.
- Connect the T8S ToneMatch mixer Main Output to the Analog Input
- Adjust the volume of the T8S ToneMatch mixer Main Output to the maximum output without distortion. This is probably between 10:00 o'clock and 12:00 o'clock on the Master Output
- While playing the source, increase the Trim level so that the Signal/Clip indicator glows green or yellow. This will probably be around 9:00-11:00 o'clock
- If the Signal/Clip indicator glows red, decrease the Trim level so that it glows only green or yellow.
