Difference between revisions of "Template:L1 Model II Analog Input Gain Staging"
m (→Analog input trim (volume, or gain) control) |
(Tag: Undo) |
||
Line 13: | Line 13: | ||
# Set the '''Trim''' control on the power stand to the 0 (zero) position. | # Set the '''Trim''' control on the power stand to the 0 (zero) position. | ||
− | # Connect the | + | # Connect the {{T8S}} Main Output to the Analog Input |
− | # Adjust the volume of the | + | # Adjust the volume of the {{T8S}} Main Output to the maximum output without distortion. This is probably between 10:00 o'clock and 12:00 o'clock on the Master Output |
− | + | # While playing the source, increase the '''Trim''' level so that the '''Signal/Clip''' indicator glows green or yellow. This will probably be around 9:00-11:00 o'clock | |
− | # While playing the source, increase the '''Trim''' level so that the '''Signal/Clip''' indicator glows green or yellow. This will probably be around 9:00- | ||
# If the '''Signal/Clip''' indicator glows red, decrease the '''Trim''' level so that it glows only green or yellow. | # If the '''Signal/Clip''' indicator glows red, decrease the '''Trim''' level so that it glows only green or yellow. | ||
[[Image:Model II Analog Input Level Green.png|Model 1S Analog Input]] | [[Image:Model II Analog Input Level Green.png|Model 1S Analog Input]] | ||
---- | ---- | ||
− | |||
[[Category:Connections]] | [[Category:Connections]] | ||
[[Category:Model II]] | [[Category:Model II]] |
Revision as of 22:18, 6 April 2019
L1 Model II Analog Input
The Analog input is a ¼ inch balanced input jack.
Analog input trim (volume, or gain) control
Setting the trim level on the Model II Power Stand is a one-time step. Once you have matched the output of the ToneMatch mixer to the input of the L1 you don't need to adjust it again.
- Set the Trim control on the power stand to the 0 (zero) position.
- Connect the T8S ToneMatch mixer Main Output to the Analog Input
- Adjust the volume of the T8S ToneMatch mixer Main Output to the maximum output without distortion. This is probably between 10:00 o'clock and 12:00 o'clock on the Master Output
- While playing the source, increase the Trim level so that the Signal/Clip indicator glows green or yellow. This will probably be around 9:00-11:00 o'clock
- If the Signal/Clip indicator glows red, decrease the Trim level so that it glows only green or yellow.