Difference between revisions of "Template:T4S/T8S Aux Inputs"
m |
m |
||
| Line 19: | Line 19: | ||
</noinclude> | </noinclude> | ||
| − | Bose engineered the {{{Mixer|T4S/T8S ToneMatch mixers}}} to have {{{MaxChannels|four (T4s) / eight (T8S)}}} full-function channels and two '''Aux'''iliary inputs. The Aux inputs {{{AuxInputs|5/6 (T4S) or 9/10 (T8S)}}} are routed directly to the Main Output. You can use the Pan and Level adjustments accessible through the PAN/AUX menu. There are no changes to routing, or signal processing available. Only {{{Mixer|T4S/T8S}}} channels one through {{{MaxChannels|four (T4S) / channels one through eight (T8S)}}} can be routed to the Aux Outputs. | + | Bose engineered the {{{Mixer|T4S/T8S ToneMatch mixers}}} to have {{{MaxChannels|four (T4s) / eight (T8S)}}} full-function channels and two '''Aux'''iliary inputs. The Aux inputs {{{AuxInputs|5/6 (T4S) or 9/10 (T8S)}}} are routed directly to the Main Output. The Aux inputs {{{AuxInputs|5/6 (T4S) or 9/10 (T8S)}}} can not be routed directly to the USB to PC output. |
| + | |||
| + | You can use the Pan and Level adjustments accessible through the PAN/AUX menu. There are no changes to routing, or signal processing available. Only {{{Mixer|T4S/T8S}}} channels one through {{{MaxChannels|four (T4S) / channels one through eight (T8S)}}} can be routed to the Aux Outputs. | ||
| + | |||
| + | |||
Revision as of 00:54, 23 January 2022
Usage
{{T4S/T8S Aux Inputs
|Mixer= T4S ToneMatch mixer or T8S ToneMatch mixer
|AuxInputs= 4/5 or 9/10
|MaxChannels= four or eight
|discussion page = link to forum discussion (optional) e.g. discussion in the Bose Message Board
}}
Template will render as it appears below this line.
Bose engineered the T4S/T8S ToneMatch mixers to have four (T4s) / eight (T8S) full-function channels and two Auxiliary inputs. The Aux inputs 5/6 (T4S) or 9/10 (T8S) are routed directly to the Main Output. The Aux inputs 5/6 (T4S) or 9/10 (T8S) can not be routed directly to the USB to PC output.
You can use the Pan and Level adjustments accessible through the PAN/AUX menu. There are no changes to routing, or signal processing available. Only T4S/T8S channels one through four (T4S) / channels one through eight (T8S) can be routed to the Aux Outputs.
The Aux inputs are useful for sources that have their own volume and signal processing (e.g. EQ or effects). They are similar to an effects return channel on other mixers. Use the Master Volume to raise and lower the volume of the Aux inputs in sync with the other channels. To change the volume of the Aux inputs relative to the other inputs you can use the AUX/PAN Level (soft menu), or on the source device.
Related discussions: n/a