Difference between revisions of "S1 Pro+ To L1 Pro"
m |
m |
||
| Line 36: | Line 36: | ||
==== XLR Cable ==== | ==== XLR Cable ==== | ||
| − | Use an XLR cable (e.g., microphone cable) to connect the S1 Pro+ Line Out to L1 Pro channel 1 or 2 | + | Use an XLR cable (e.g., microphone cable) to connect the S1 Pro+ Line Out to L1 Pro channel 1 or 2. |
| + | *The advantage to this method is XLR cables are common and easily found | ||
| + | *The disadvantage is you takes up a full-featured channel on the L1 Pro | ||
[[File:S1 Pro+ to L1 Pro2.jpg|800px]] | [[File:S1 Pro+ to L1 Pro2.jpg|800px]] | ||
==== XLR to 1/4 inch (6.3 mm) Tip-Ring-Sleeve ==== | ==== XLR to 1/4 inch (6.3 mm) Tip-Ring-Sleeve ==== | ||
Use an XLR to 1/4 inch (6.3 mm) Tip-Ring-Sleeve cable | Use an XLR to 1/4 inch (6.3 mm) Tip-Ring-Sleeve cable | ||
| + | *The advantage to this method is this leaves both full-featured channels (1 & 2) on the L1 Pro available for other uses | ||
[[File:S1 Pro+ to L1 Pro3.jpg|800px]] | [[File:S1 Pro+ to L1 Pro3.jpg|800px]] | ||
| Line 48: | Line 51: | ||
# On S1 Pro+, bring up the channel volumes to the desired levels | # On S1 Pro+, bring up the channel volumes to the desired levels | ||
# On L1 Pro, bring up the channel volume to suit your application. Note: This will not necessarily match the same position on the dials as S1 Pro+ | # On L1 Pro, bring up the channel volume to suit your application. Note: This will not necessarily match the same position on the dials as S1 Pro+ | ||
| + | # Turn down the volume on any unused channels | ||
---- | ---- | ||
Revision as of 22:48, 17 August 2024
S1 Pro+ to L1 Pro
Connect an S1 Pro+ to an L1 Pro
The objective is to use the S1 Pro+ as the stage monitor facing the performer(s) and the L1 Pro will be the main loudspeaker for the audience; the Front of House system (FOH).
You will connect your microphone and or instruments to the S1 Pro+
Terms used
- S1 Pro+ (stage monitor and mixer)
- This is the S1 Pro+ to which you have connected your microphone and or instruments using inputs 1, 2, 3
- L1 Pro (main loudspeaker for the audience - Front of House)
- This is the L1 Pro to which you send the sound from S1 Pro
Set Up
- S1 Pro+ Turn down the volume on all channels.
- L1 Pro
- Turn down the volume on all channels.
- Set Bass and Treble at 12:00 o'clock (flat)
- Set Reverb off (see alternate connection below)
- Set ToneMatch to Off
XLR Cable
Use an XLR cable (e.g., microphone cable) to connect the S1 Pro+ Line Out to L1 Pro channel 1 or 2.
- The advantage to this method is XLR cables are common and easily found
- The disadvantage is you takes up a full-featured channel on the L1 Pro
XLR to 1/4 inch (6.3 mm) Tip-Ring-Sleeve
Use an XLR to 1/4 inch (6.3 mm) Tip-Ring-Sleeve cable
- The advantage to this method is this leaves both full-featured channels (1 & 2) on the L1 Pro available for other uses
or use an XLR cable with a converter
Levels
- On S1 Pro+, bring up the channel volumes to the desired levels
- On L1 Pro, bring up the channel volume to suit your application. Note: This will not necessarily match the same position on the dials as S1 Pro+
- Turn down the volume on any unused channels