Difference between revisions of "Acoustic Guitar"
m |
({{:Acoustic Guitar Bass Frequencies}}) |
||
| Line 21: | Line 21: | ||
As a starting point for acoustic guitar with the XT Live, be sure that the footswitch for 'Amp' is switched off. Even if you have 'No Amp' selected for a model, I found that it makes a world of difference when I bypass the whole Amp circuit this way. (Prior to discovering this, I couldn't get an uncolored acoustic sound to start with.) From Chuck-at-Bose<ref>[http://bose.infopop.cc/eve/forums/a/tpc/f/630101665/m/7761075721?r=2281099531#2281099531 Chuck-at-Bose XT Live for Acoustic Guitar in the Bose® Musicians Community Message Boards]</ref> | As a starting point for acoustic guitar with the XT Live, be sure that the footswitch for 'Amp' is switched off. Even if you have 'No Amp' selected for a model, I found that it makes a world of difference when I bypass the whole Amp circuit this way. (Prior to discovering this, I couldn't get an uncolored acoustic sound to start with.) From Chuck-at-Bose<ref>[http://bose.infopop.cc/eve/forums/a/tpc/f/630101665/m/7761075721?r=2281099531#2281099531 Chuck-at-Bose XT Live for Acoustic Guitar in the Bose® Musicians Community Message Boards]</ref> | ||
| − | + | {{:Acoustic Guitar Bass Frequencies}} | |
---- | ---- | ||
Revision as of 22:04, 23 December 2006
Contents
Pickups and Systems
Fishman Aura
"If you want high gain, you would use all pickup and no mic on the blender."[1]
"You can have all pickup (no Aura sound image) or all Aura sound image (no pickup)... or blend them together in steps... The sound image is only 'one side'... if you look at it that way. If you blend to pickup only, you only hear the pickup... its like by-passing the Aura."
Owners Talking
There is a very interesting discussion[2] about pickups and preamp systems from D-Tar, Fishman, K & K, LR Baggs and others.
See: Acoustic Guitar discussion
References
Pickups at fingerpick.com - Excellent, comprehensive article about pickups and microphones for use with Guitar.
Acoustic Guitar and the Line6 Pod XTLive
As a starting point for acoustic guitar with the XT Live, be sure that the footswitch for 'Amp' is switched off. Even if you have 'No Amp' selected for a model, I found that it makes a world of difference when I bypass the whole Amp circuit this way. (Prior to discovering this, I couldn't get an uncolored acoustic sound to start with.) From Chuck-at-Bose[3]
Acoustic Guitar Bass Frequencies
Hilmar-at-Bose Speaks about B1s and Acoustic Guitar[4]
Oldghm[5], you did some really interesting experiments there. However, you have to be really careful when using an RTA. You can feed these things a pure sine wave at 80 Hz and by turning it up make the 63 Hz and even the 40Hz LED light up. They will be lower than the 80 Hz LED, but still come on. That does NOT mean, that the sine wave contains any other frequency than 80 Hz (it certainly doesn’t). It only means that the RTA has a pretty limited frequency resolution. The 63 Hz LED will respond best to 63 Hz signal but it’s in no way “blind” to 80 Hz signal. Thus being said, the actual frequency content is not easy to determine. All sounds that have a pitch are certainly constraint to 80 Hz and up (in standard tuning) and there isn’t actually too much energy at the fundamental. However, the “non-pitched” sounds like a hard string attack or whacking the top with your hand can very well have lower frequencies. Unfortunately, I don’t have any hard data on that, but we will measure that at some point.
- ↑ Fishman Aura Post in the Bose® Musicians Community Message Boards
- ↑ Acoustic Guitar discussion in the Bose® Musicians Community Message Boards
- ↑ Chuck-at-Bose XT Live for Acoustic Guitar in the Bose® Musicians Community Message Boards
- ↑ Hilmar-at-Bose PackLite Questions
- ↑ Oldghm comment on using an RTA PackLite Questions