Difference between revisions of "T1 ToneMatch® Audio Engine / Microphone Stand Bracket"
(→Owner Comments and Alternatives: added hints) |
|||
Line 20: | Line 20: | ||
*[http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/3821030784 T1 mic stand adapter, thoughts and questions] - Owners talking about the microphone stand bracket. | *[http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/3821030784 T1 mic stand adapter, thoughts and questions] - Owners talking about the microphone stand bracket. | ||
*[http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/4291011005 Sight Lines and the T1<sup>®</sup>] - Owners talking about placement of the T1® on the stage using the Microphone Stand Bracket. | *[http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/4291011005 Sight Lines and the T1<sup>®</sup>] - Owners talking about placement of the T1® on the stage using the Microphone Stand Bracket. | ||
+ | |||
+ | ==== Hints ==== | ||
+ | * The bracket that sits parallel to the floor has a bevel on the top. The bevel should run down, facing you. If the bevel runs down away from you, the bracket is upside down and the {{T1 nl}} will not sit properly on top of it. | ||
+ | * Secure the ToneMatch® cable to your microphone stand, above the {{T1 nl}}. This will help keep it secure on the bracket and help to keep it from hitting the floor if it becomes dislodged from the bracket. | ||
+ | * If you use a microphone stand with a wider than usual diameter, try removing the inserts.<br /> | ||
+ | [http://bose.infopop.cc/eve/forums?a=tpc&f=3976055944&m=956104903&r=956104903#956104903 Source: dberch on the Forum] | ||
=== Where to get it === | === Where to get it === |
Revision as of 11:35, 17 September 2009
{{#Click:http://www.bose.com/controller?url=/shop_online/speakers/portable_amplification_systems/accessories/l1_tonematch_micstandbracket_acc.jsp%7CL1 tonematch micstandbracket acc bl lg.jpg|375px|T1® microphone stand bracket}}
There is an optional microphone stand bracket for the T1 ToneMatch Audio Engine.
This is actually two pieces.
- The microphone stand bracket that attaches to a microphone stand and a
- The mounting bar that connects to that.
The T1 ToneMatch Audio Engine sits on that mounting bar.
Documentation
Here is an excerpt from the Template:T1™ Manual - page 10.
Owner Comments and Alternatives
- T1 mic stand adapter, thoughts and questions - Owners talking about the microphone stand bracket.
- Sight Lines and the T1® - Owners talking about placement of the T1® on the stage using the Microphone Stand Bracket.
Hints
- The bracket that sits parallel to the floor has a bevel on the top. The bevel should run down, facing you. If the bevel runs down away from you, the bracket is upside down and the T1 ToneMatch® Audio Engine will not sit properly on top of it.
- Secure the ToneMatch® cable to your microphone stand, above the T1 ToneMatch® Audio Engine. This will help keep it secure on the bracket and help to keep it from hitting the floor if it becomes dislodged from the bracket.
- If you use a microphone stand with a wider than usual diameter, try removing the inserts.
Where to get it
See the second item on the Bose® Accessories Page