Difference between revisions of "Dual Mono"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m
m (Stereo / Mono / Distributed Systems)
Line 21: Line 21:
 
*[http://bose.infopop.cc/eve/forums/a/tpc/f/8766055944/m/217104153/r/656105263 Stereo vs. Mono in a Live Setting]
 
*[http://bose.infopop.cc/eve/forums/a/tpc/f/8766055944/m/217104153/r/656105263 Stereo vs. Mono in a Live Setting]
  
*[[Live or PreRecorded / Stereo and *-Mono]] Chris Ickler's report on listening tests with four L1™ and multiple B1 Bass modules.
+
*[[Live or PreRecorded / Stereo and *-Mono]] Chris Ickler's report on listening tests with four {{L1 nl}}s and multiple B1 Bass modules.
  
 +
* [[Stereo / Mono / Distributed Systems]] Ken-at-Bose
 
<!--
 
<!--
 
This page is a stub. Please pull in some text from the links above.
 
This page is a stub. Please pull in some text from the links above.

Revision as of 19:51, 27 March 2010


Dual Mono

This is amplifying the same sound source through two separate loudspeakers. 

Hilmar-at-Bose wrote:

Dual mono is usually not a good idea, if you have more than one performer. With more than one performer/source it's in my opinion always preferable to separate the sources (i.e. one source per L1). The spatial separation and precise localization helps more with clarity much more than the added gain.
For a single performer/single source it's not quite so clear cut. One will be more accurate (i.e. sound is clearly located at performer's position, more consistent spectrum) and two will sound wider and more spacious. In the end, that is an artistic decision, depending on which one is closer to your artistic intent.
-- Source Dual mono is usually not a good idea

More related reading: