Difference between revisions of "T1 ToneMatch® Audio Engine to Compact"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m (New page: This refers to the connection from a {{T1}} Master or Aux Output using ¼ inch jack connections. [[T1_ToneMatch%C2%AE_Audio_Engine_/_1/4_inch_Output_Connections_to_L1%C2%AE_Family_M...)
 
m
Line 1: Line 1:
This refers to the connection from a {{T1}} Master or Aux Output using ¼ inch jack connections.
+
You can connect a {{T1}} to {{Compact}}
 +
 
 +
 
 +
From page 12 of the {{Compact Owners Guide}}
 +
 
 +
[[Image:CompactOwnersGuideT1Connection.gif]]
 +
 
 +
The connection from a {{T1}} Master or Aux Output using ¼ inch jack connections.  
  
 
[[T1_ToneMatch%C2%AE_Audio_Engine_/_1/4_inch_Output_Connections_to_L1%C2%AE_Family_Members#L1.C2.AE_Compact|T1® to Compact]]
 
[[T1_ToneMatch%C2%AE_Audio_Engine_/_1/4_inch_Output_Connections_to_L1%C2%AE_Family_Members#L1.C2.AE_Compact|T1® to Compact]]
Line 5: Line 12:
 
{{#lst:T1 ToneMatch® Audio Engine / 1/4 inch Output Connections to L1® Family Members|Balanced}}
 
{{#lst:T1 ToneMatch® Audio Engine / 1/4 inch Output Connections to L1® Family Members|Balanced}}
  
This is page 12 of the {{Compact Owners Guide}}
 
 
[[Image:CompactOwnersGuideT1Connection.gif]]
 
  
 
=== Channel 2 Connection from {{T1}} Details ===
 
=== Channel 2 Connection from {{T1}} Details ===
 
[[Image:Compact Channel 2 Line Level.png]]
 
[[Image:Compact Channel 2 Line Level.png]]

Revision as of 12:44, 18 May 2011

You can connect a T1 ToneMatch Audio Engine to L1 Compact


From page 12 of the L1® Compact Owner's Guide (pdf format)

CompactOwnersGuideT1Connection.gif

The connection from a T1 ToneMatch Audio Engine Master or Aux Output using ¼ inch jack connections.

T1® to Compact


¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)

A balanced connection is preferred and will provide better noise rejection over greater distances than the unbalanced connection.

Tip-Ring-Sleeve to Tip-Ring-Sleeve

¼ Inch Tip-Ring-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced)

This should work fine but a balanced connection (immediately above) is preferred especially if you will have cable runs in excess of 20 feet (6 meters) or if you hear line noise, hum or hiss.

Tip-Sleeve to Tip-Sleeve



Channel 2 Connection from T1 ToneMatch Audio Engine Details

Compact Channel 2 Line Level.png