Difference between revisions of "T1® No Sound"
m (New page: If you have no sound coming through your {{T1}}. If you are using 1/4 inch inputs make sure that you are using the inputs in the top row (in the center of the XLR/Combo inputs). NOT the P...) |
(No difference)
|
Revision as of 02:58, 29 March 2015
If you have no sound coming through your T1 ToneMatch Audio Engine.
If you are using 1/4 inch inputs make sure that you are using the inputs in the top row (in the center of the XLR/Combo inputs). NOT the Preamp Outputs in the bottom row.
