Difference between revisions of "Bose T4S and T8S ToneMatch® Mixers Compared to Bose T1® ToneMatch Audio Engine"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
(Created article)
 
m
Line 1: Line 1:
−
Draft
+
Here's a quick rundown of the additions and changes:
  
−
I'll start with what we added. Channels 1,2,3 and 4 all have combo XLR-1/4" inputs. There's a channel 5 and 6 that is 1/4" TRS. The big one is stereo outputs and processing. Two digital ToneMatch outputs and parallel analog 1/4" TRS. Added a headphone jack. New magnetic cover, new 1/4"-20 threaded insert at the bottom for use with mounting hardware, tap-tempo delay, dedicated Aux reverb, a second Aux out, 3-band PEQ per channel, pan (of course), master out 5-band EQ, USB playback (WAV/MP3) from thumb drives, new industrial design. I'm probably forgetting something...
+
*  Channels 1, 2, 3 and 4 all have combo XLR-1/4" inputs
 +
*    There's a channel 5 and 6 that is 1/4" Tip-Ring-Sleeve
 +
*    Stereo outputs and processing
 +
**        Two digital ToneMatch outputs and parallel analog 1/4" Tip-Ring-Sleeve
 +
**        Pan
 +
*  Headphone jack
 +
*  New 1/4"-20 threaded insert at the bottom for use with mounting hardware,
 +
*    Tap-tempo delay
 +
*    Dedicated Aux Reverb
 +
*    Second Aux out
 +
*    3-band Parametric EQ per channel
 +
*    Master out 6-band EQ,
 +
*    USB playback (WAV/MP3) from thumb drives
 +
*    New industrial design
 +
*    New magnetic cover
  
  
−
What did we take away from the T1 to the T4S? We removed the L1 and mic stand adapter (instead have a common 1/4"-20 insert), and we took away the preamp outs based on customer feedback that it was used very infrequently. Hope this info helps!
+
Removed
 +
 
 +
*    Removed the L1® Cylindrical Radiator® stand and the mic stand adapter (replaced by the common 1/4"-20 insert)
 +
*    Removed the preamp outs based on customer feedback that it was used very infrequently
  
−
Source: https://www.facebook.com/boseprofessional/posts/1774366189260306?comment_id=1774376785925913&reply_comment_id=1774563462573912&comment_tracking=%7B%22tn%22%3A%22R4%22%7D
 
  
 
----
 
----

Revision as of 18:03, 26 January 2018

Here's a quick rundown of the additions and changes:

  • Channels 1, 2, 3 and 4 all have combo XLR-1/4" inputs
  • There's a channel 5 and 6 that is 1/4" Tip-Ring-Sleeve
  • Stereo outputs and processing
    • Two digital ToneMatch outputs and parallel analog 1/4" Tip-Ring-Sleeve
    • Pan
  • Headphone jack
  • New 1/4"-20 threaded insert at the bottom for use with mounting hardware,
  • Tap-tempo delay
  • Dedicated Aux Reverb
  • Second Aux out
  • 3-band Parametric EQ per channel
  • Master out 6-band EQ,
  • USB playback (WAV/MP3) from thumb drives
  • New industrial design
  • New magnetic cover


Removed

  • Removed the L1® Cylindrical Radiator® stand and the mic stand adapter (replaced by the common 1/4"-20 insert)
  • Removed the preamp outs based on customer feedback that it was used very infrequently


Retrieved from "https://toonz.ca/bose/wiki/index.php?title=Bose_T4S_and_T8S_ToneMatch®_Mixers_Compared_to_Bose_T1®_ToneMatch_Audio_Engine&oldid=19061"