Difference between revisions of "T4S to Two S1 Pro Systems (Stereo)"
m |
m (→Setting Levels) |
||
Line 29: | Line 29: | ||
;Turn on the S1 Pro | ;Turn on the S1 Pro | ||
− | #Play some music on the {T4S | + | #Play some music on the {{T4S}} and bring up the Master Volume to 12:00 o'clock |
#Bring up the channel volume on the S1 Pros so you get a solid green light. If you see red or you hear distortion, turn down the channel volume. | #Bring up the channel volume on the S1 Pros so you get a solid green light. If you see red or you hear distortion, turn down the channel volume. | ||
Latest revision as of 02:48, 2 September 2018
Here's a quick overview of how you can connect a T4S to an S1 Pro
Initial Settings
- Leave the T4S and S1 Pro turned off until you have things connected
- Connect the T4S power supply to the T4S (T4S power supply sold separately)
- Connect the T4S Right Output to the Right S1 Pro System channel 1 or 2
- Connect the T4S Left Output to the Left S1 Pro System channel 1 or 2
Cables
- Use 1/4 inch (6.35 mm) Tip-Ring-Sleeve cables for best results
S1 Pro System
On each S1 Pro System
T4S ToneMatch mixer
- Turn on the T4S
- Set the Rotary Selector to PAN/AUX
- Press the CH EDIT button for each channel you are using and pan the input left or right as required
Setting Levels
- Turn on the S1 Pro
- Play some music on the T4S ToneMatch mixer and bring up the Master Volume to 12:00 o'clock
- Bring up the channel volume on the S1 Pros so you get a solid green light. If you see red or you hear distortion, turn down the channel volume.
Now use the T4S ToneMatch mixer Master Volume to control the overall volume.