Difference between revisions of "T4S ToneMatch Mixer to S1 Pro system"

Revision as of 21:33, 22 October 2018

Here's a quick overview of how you can connect a T4S to an S1 Pro

Leave the T4S and S1 Pro turned off until you have things connected
Connect the T4S power supply to the T4S (T4S power supply sold separately)
Connect the T4S Right Output to S1 Pro channel 1 or 2
- Use a 1/4 inch Tip-Ring-Sleeve cable for best results
On the S1 Pro channel:
- Turn off the reverb
- Set both tone controls to the center position
- Set the channel volume off
Turn on the T4S
- On the T4S
  1. Set the Rotary Selector to PAN/AUX
  2. Press the CH EDIT button for each channel you are using and pan the input hard RIGHT
  3. Note: Steps 1 and 2 above are one-time-only. You don't have to change this unless you get another S1 Pro and want to run in stereo
Connect all your sound sources to the T4S
Turn on the S1 Pro
Bring up the channel volume on the S1 Pro to about 11:00 o'clock
Control the volume using the T4S Master Volume
If you see the S1 Pro channel 1 light turning solid red occasionally, turn down the volume on the T4S
Or if you see the S1 Pro channel 1 light turning solid red frequently, turn down the volume on the S1 Pro

If you have questions, please join the conversation in the Bose Portable PA Community.

@@ Line 31: / Line 31: @@
 <li>Connect all your sound sources to the T4S</li>
 <li>Turn on the S1 Pro</li>
-<li>Bring up the channel volume on the S1 Pro to the <g class="gr_ gr_37 gr-alert gr_spell gr_inline_cards gr_run_anim ContextualSpelling multiReplace" id="37" data-gr-id="37">center</g> position</li>
+<li>Bring up the channel volume on the S1 Pro to about 11:00 o'clock</li>
+<li>Control the volume using the T4S Master Volume</li>
+<li>If you see the S1 Pro channel 1 light turning solid red occasionally, turn down the volume on the T4S</li>
+<li>Or if you see the S1 Pro channel 1 light turning solid red frequently, turn down the volume on the S1 Pro</li>
 </ol>
 <p><br /><br /></p>