Difference between revisions of "L1 Pro32 Separating the Sections of the Mid-High Array"
m |
|||
Line 1: | Line 1: | ||
− | [[File:L1 Pro32 split | + | [[File:L1 Pro32 split mid-high array.jpg.jpg|200px|right]] |
;Question: How do I separate the upper and lower sections of the L1 Pro32 mid-high array? | ;Question: How do I separate the upper and lower sections of the L1 Pro32 mid-high array? | ||
Revision as of 23:44, 1 May 2021
- Question
- How do I separate the upper and lower sections of the L1 Pro32 mid-high array?
- Answer
- Wear rubberized work gloves so you can get a good grip on the sections.
- Firmly grasp the sections about 12" above and 3" below the break.
- Hold the bottom section steady and gently rock the top section front to back about 1/4 inch. Don't rock side to side.
- While rocking, gently ease the top section away from the bottom.